Valid

YD/T 4851-2024YANG model for broadband access network slicing based on SDN (English PDF)

基于SDN的宽带接入网 接入网切片YANG模型

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for YD/T 4851-2024 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

July 5, 2024

Implementation date

October 1, 2024

Scope

YD/T 4851-2024 is the English-translated version of 基于SDN的宽带接入网 接入网切片YANG模型.

YD/T 4851-2024 is the Chinese standard "YANG model for broadband access network slicing based on SDN".

This standard specifies the YANG model and slice management operations of the northbound interface of the SDN controller, the YANG model and slice operations of the southbound interface of the SDN controller, and the slice management data model of the optical network unit (ONU) interface in broadband access networks based on software defined networks (SDN).

This standard applies to the development and production of access network equipment, access network control systems and slice management platforms that support slicing functions in public telecommunication network environments, and can also be used as a reference for dedicated telecommunication networks.

It was issued by Ministry of Industry and Information Technology. Issued on 2024-07-05, in force from 2024-10-01.

Found what you need?

Document preview — YD/T 4851-2024

National Standard of the People's Republic of China

ICS
33.040.50
Classification
M42

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Abbreviations
  • 3.1 Terms and definitions
  • 4 General
  • 4.1 Test environment
  • 4.2 UE Information
  • 4.3 Test Implementation
  • 5 Technical requirements

1 Foreword

YD/T 4851-2024 was issued by Ministry of Industry and Information Technology on 5 July 2024 and has been in force since 1 October 2024.

The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard specifies the YANG model and slice management operations of the northbound interface of the SDN controller, the YANG model and slice operations of the southbound interface of the SDN controller, and the slice management data model of the optical network unit (ONU) interface in broadband access networks based on software defined networks (SDN). This standard applies to the development and production of access network equipment, access network control systems and slice management platforms that support slicing functions in public telecommunication network environments, and can also be used as a reference for dedicated telecommunication networks.

YD/T 4851-2024 falls under ICS 33.040.50, in the field of telecommunications.

This catalogue holds 3,420 other YD/T standards in that field.

In this catalogue, YD/T standards carry edition years from 1982 to 2026.

3 About this standard

Sector: Telecommunication Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 15 pages (approximate)

4 Related standards

Standards on related subjects:

YD/T 1092-2023 — Telecommunication cables - Foamed polyolefin dielectric, corrugated copper-tube outer conductor, 50 Ohm radio-frequency coaxial cable for wireless communications

YD/T 2165-2010 — Technical specification of modular uninterruptible power systems for telecommunications

YD/T 841-1996 — Underground communication pipe with plastic pipe

YD/T 4853-2024 — Technical requirements for access network slicing equipment

YD/T 4852-2024 — SDN-based broadband access network testing method Controller southbound interface based on PON device YANG model

YD/T 4850-2024 — Broadband access network controller based on SDN

5 Classification and status

International classification (ICS): 33.040.50

Chinese Standard Classification (CCS): M 42

Prefix YD/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download YD/T 4851-2024

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YD/T 4851-2024

$590.00