YD/T 4809-2024Technical requirements for automated quality measurement of in-band flow information in telecommunication operator networks (English PDF)
电信运营商网络带内流信息的自动化质量测量数据面技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 4809-2024 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
July 5, 2024
Implementation date
October 1, 2024
Scope
YD/T 4809-2024 is the English-translated version of 电信运营商网络带内流信息的自动化质量测量数据面技术要求.
YD/T 4809-2024 is the Chinese standard "Technical requirements for automated quality measurement of in-band flow information in telecommunication operator networks".
This standard specifies the data content and encapsulation method of the automated quality measurement technology for IP network in-band flow information, including the data content of the flow detection technology based on the alternating dyeing principle and its IPv6 encapsulation method, SRv6 encapsulation method, MPLS encapsulation method, etc., and the data content of the flow detection technology based on the IOAM principle and its IPv6 encapsulation method, SRv6 encapsulation method, MPLS encapsulation method, etc. This standard is applicable to the field of data communication and can be used to guide the development, testing and deployment of network equipment that supports flow detection technology.
It was issued by Ministry of Industry and Information Technology. Issued on 2024-07-05, in force from 2024-10-01.
Found what you need?
Document preview — YD/T 4809-2024
National Standard of the People's Republic of China
- ICS
- 33.040.40
- Classification
- L78
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 4809-2024 was issued by Ministry of Industry and Information Technology on 5 July 2024 and has been in force since 1 October 2024.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the data content and encapsulation method of the automated quality measurement technology for IP network in-band flow information, including the data content of the flow detection technology based on the alternating dyeing principle and its IPv6 encapsulation method, SRv6 encapsulation method, MPLS encapsulation method, etc., and the data content of the flow detection technology based on the IOAM principle and its IPv6 encapsulation method, SRv6 encapsulation method, MPLS encapsulation method, etc. This standard is applicable to the field of data communication and can be used to guide the development, testing and deployment of network equipment that supports flow detection technology.
YD/T 4809-2024 falls under ICS 33.040.40, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
CJ/T 188-2018 — Technical requirements of utility meters data transmission
YDC 079-2009 — Technical Specifications and Testing Methods of Wireless LAN for Mobile Terminals
YD/T 4807-2024 — Technical requirements of YANG model based on MPLS segment routing in IP bearer network
YD/T 4802-2024 — Architecture and functional requirements of the intelligent communication network willingness management module based on SDN/NFV
YD/T 4800-2024 — Technical requirements for the generic YANG data model for routing domains
5 Classification and status
International classification (ICS): 33.040.40
Chinese Standard Classification (CCS): L 78
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 4809-2024
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 4809-2024
$270.00