Valid

YD/T 4785.5-2024SRv6 Control Plane Technical Requirements - Part 5: PCEP Protocol Extensions (English PDF)

SRv6控制面技术要求 第5部分:PCEP协议扩展

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for YD/T 4785.5-2024 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

July 5, 2024

Implementation date

October 1, 2024

Scope

YD/T 4785.5-2024 is the English-translated version of SRv6控制面技术要求 第5部分:PCEP协议扩展.

YD/T 4785.5-2024 is the Chinese standard "SRv6 Control Plane Technical Requirements - Part 5: PCEP Protocol Extensions".

This standard specifies the technical requirements for the extension of the path computation unit communication protocol (PCEP) in the segment routing (SRv6) network control plane based on the IPv6 data plane, including the extension of existing fields to announce the SRv6 TE path creation capability, the addition of TLV/Subobject to announce the SRv6 capability and SRv6 SID information, etc. This standard is applicable to the scenario where the PCEP protocol is used to implement SRv6 Policy in the SRv6 network, and is also applicable to the development and testing of network equipment and controllers that support SRv6.

It was issued by Ministry of Industry and Information Technology. Issued on 2024-07-05, in force from 2024-10-01.

Found what you need?

Document preview — YD/T 4785.5-2024

National Standard of the People's Republic of China

ICS
30.040.35
Classification
L78

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Abbreviations
  • 3.1 Terms and definitions
  • 4 General
  • 4.1 Test environment
  • 4.2 UE Information
  • 4.3 Test Implementation
  • 5 Requirements

1 Foreword

YD/T 4785.5-2024 was issued by Ministry of Industry and Information Technology on 5 July 2024 and has been in force since 1 October 2024.

It is one of 5 parts of the YD/T 4785 series.

The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard specifies the technical requirements for the extension of the path computation unit communication protocol (PCEP) in the segment routing (SRv6) network control plane based on the IPv6 data plane, including the extension of existing fields to announce the SRv6 TE path creation capability, the addition of TLV/Subobject to announce the SRv6 capability and SRv6 SID information, etc. This standard is applicable to the scenario where the PCEP protocol is used to implement SRv6 Policy in the SRv6 network, and is also applicable to the development and testing of network equipment and controllers that support SRv6.

YD/T 4785.5-2024 is filed under Chinese Standard Classification L78, in the field of electronic components and information technology.

This catalogue holds 2,288 other YD/T standards without an ICS number.

In this catalogue, YD/T standards carry edition years from 1982 to 2026.

3 About this standard

Sector: Telecommunication Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 15 pages (approximate)

4 Related standards

Other parts of this standard:

YD/T 4785.1-2024 — Part 1: ISIS Protocol Extensions

YD/T 4785.2-2024 — Part 2: OSPFv3 Protocol Extensions

YD/T 4785.3-2024 — Part 3: BGP-LS Protocol Extension

YD/T 4785.4-2024 — Part 4: BGP SRv6 Policy Protocol Extension

Standards on related subjects:

CJ/T 188-2018 — Technical requirements of utility meters data transmission

YDC 079-2009 — Technical Specifications and Testing Methods of Wireless LAN for Mobile Terminals

5 Classification and status

International classification (ICS): 30.040.35

Chinese Standard Classification (CCS): L 78

Prefix YD/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download YD/T 4785.5-2024

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YD/T 4785.5-2024

$255.00