YD/T 4733-2024Technical requirements and test methods for vehicle communication antennas (English PDF)
车载通信天线技术要求和测试方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 4733-2024 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
July 5, 2024
Implementation date
October 1, 2024
Scope
YD/T 4733-2024 is the English-translated version of 车载通信天线技术要求和测试方法.
YD/T 4733-2024 is the Chinese standard "Technical requirements and test methods for vehicle communication antennas".
This standard specifies the performance requirements, environmental reliability requirements and corresponding test methods of the antenna monomer and the vehicle-mounted communication antenna at two angles after the antenna is installed on the vehicle, and specifies the requirements for the test system and test site.
This standard is applicable to the antenna used for communication with external equipment in the vehicle antenna, as well as the antenna used for communication with other on-board equipment or other equipment in the vehicle, including but not limited to FM/AM antennas, satellite navigation receiving antennas (Beidou/GPS), mobile communication antennas (2G/3G/4G), remote control transceiver antennas, vehicle Bluetooth antennas, and WiFi antennas.
It was issued by Ministry of Industry and Information Technology. Issued on 2024-07-05, in force from 2024-10-01.
Found what you need?
Document preview — YD/T 4733-2024
National Standard of the People's Republic of China
- ICS
- 33.060.20
- Classification
- M36
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 4733-2024 was issued by Ministry of Industry and Information Technology on 5 July 2024 and has been in force since 1 October 2024.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the performance requirements, environmental reliability requirements and corresponding test methods of the antenna monomer and the vehicle-mounted communication antenna at two angles after the antenna is installed on the vehicle, and specifies the requirements for the test system and test site. This standard is applicable to the antenna used for communication with external equipment in the vehicle antenna, as well as the antenna used for communication with other on-board equipment or other equipment in the vehicle, including but not limited to FM/AM antennas, satellite navigation receiving antennas (Beidou/GPS), mobile communication antennas (2G/3G/4G), remote control transceiver antennas, vehicle Bluetooth antennas, and WiFi antennas.
YD/T 4733-2024 falls under ICS 33.060.20, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
YD/T 3711-2020 — Technical requirement of IMS based vehicle eCall system based on public telecommunication network
GB/T 32401-2015 — Technical requirements and measurement methods for VHF/UHF frequency
GB/T 12572-2008 — Universal requirements and measurement methods of parameters for radio transmitting equipment
YD/T 4725-2024 — 5G digital cellular mobile communication network FDD repeater test method
YD/T 4724-2024 — Technical requirements for FDD repeater stations in 5G digital cellular mobile communication networks
YD/T 4723-2024 — 5G digital cellular mobile communication network shared base station equipment test method
5 Classification and status
International classification (ICS): 33.060.20
Chinese Standard Classification (CCS): M 36
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 4733-2024
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 4733-2024
$665.00