YD/T 4728-20245G multi-mode dual-SIM dual-standby terminal equipment test method (English PDF)
5G多模双卡双待终端设备测试方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 4728-2024 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
July 5, 2024
Implementation date
October 1, 2024
Scope
YD/T 4728-2024 is the English-translated version of 5G多模双卡双待终端设备测试方法.
YD/T 4728-2024 is the Chinese standard "5G multi-mode dual-SIM dual-standby terminal equipment test method".
This standard specifies the test methods for access network selection, card slot requirements, service functions, service concurrency, 4G/5G interoperability, etc. of different types of 5G multi-mode dual-card dual-standby terminals under different standards.
This standard is applicable to the testing of 5G multi-mode dual-card dual-standby handsets in stand-alone and non-stand-alone networks in the sub-6GHz frequency band supporting enhanced mobile broadband scenarios (eMBB).
It was issued by Ministry of Industry and Information Technology. Issued on 2024-07-05, in force from 2024-10-01.
Found what you need?
Document preview — YD/T 4728-2024
National Standard of the People's Republic of China
- ICS
- 33.060.99
- Classification
- M36
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 4728-2024 was issued by Ministry of Industry and Information Technology on 5 July 2024 and has been in force since 1 October 2024.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the test methods for access network selection, card slot requirements, service functions, service concurrency, 4G/5G interoperability, etc. of different types of 5G multi-mode dual-card dual-standby terminals under different standards. This standard is applicable to the testing of 5G multi-mode dual-card dual-standby handsets in stand-alone and non-stand-alone networks in the sub-6GHz frequency band supporting enhanced mobile broadband scenarios (eMBB).
YD/T 4728-2024 falls under ICS 33.060.99, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
YD/T 3711-2020 — Technical requirement of IMS based vehicle eCall system based on public telecommunication network
GB/T 32401-2015 — Technical requirements and measurement methods for VHF/UHF frequency
GB/T 12572-2008 — Universal requirements and measurement methods of parameters for radio transmitting equipment
YD/T 4722-2024 — Technical requirements for shared base station equipment for 5G digital cellular mobile communication networks
YD/T 4720-2024 — 5G digital cellular mobile communication network sub-6GHz frequency band base station equipment test method (Phase II)
YD/T 4719-2024 — Technical requirements for base station equipment in the frequency band below 6 GHz for 5G digital cellular mobile communication networks (Phase II)
5 Classification and status
International classification (ICS): 33.060.99
Chinese Standard Classification (CCS): M 36
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 4728-2024
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 4728-2024
$695.00