YD/T 4675-202412V DC uninterruptible power supply system for rack (English PDF)
机架用12V直流不间断电源系统
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 4675-2024 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
March 29, 2024
Implementation date
July 1, 2024
Scope
YD/T 4675-2024 is the English-translated version of 机架用12V直流不间断电源系统.
YD/T 4675-2024 is the Chinese standard "12V DC uninterruptible power supply system for rack". This standard specifies the composition, classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage of 12V DC uninterruptible power supply systems for racks.
This standard applies to 12V DC output uninterruptible systems built into the racks of ICT equipment. It was issued by Ministry of Industry and Information Technology. Issued on 2024-03-29, in force from 2024-07-01.
Found what you need?
Document preview — YD/T 4675-2024
National Standard of the People's Republic of China
- Classification
- M41
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Term
- 3 Terms and Definitions
- 3.2 Abbreviations
- 3.3 Specifications
- 3.4 Product model and designation
- 3.5 Product marking
- 4 Product Classification
- 4.1 General
- 4.2 Model and name
- 4.3 Test Waveform
- 4.4 Product labelling
- 5 Requirements
- 5.2 Chemical components
- 5.3 SPD Disconnector Inspection
- 5.4 Environmental protection property
- 5.5 Material compatibility
- 5.6 Spurious emission
- 5.7 Transmit Spectrum Mask
- 5.8 Time of Rising Edge and Falling Edge
- 5.9 In-band Flatness
- 6 Test methods
- 6.2 Term restrictions
- 6.3 End-of-manufacturing inspection
- 6.4 Type inspection
- 6.5 Phone Program
- 6.6 OTASP/OTAPA Function
- 6.7 Processing of PIN
- 6.8 Fixed Dialing Number (FDN)
- 6.9 Abbreviated Dialing Number (ADN)
- 7 Inspection Rules
- 7.1 Packaging
- 7.2 Marking
- 7.3 Transport
- 7.4 Storage
- 7.5 Safety Test for Temporary Overvoltage Failure
- 7.6 Test of Temporary Overvoltage Withstand Characteristic
- 7.7 SPD Thermal Stability Test
- 8 Marking, Packing, Transport and Storage
- 8.1 Voltage Drop Test
- 8.2 Surge Withstand Capability at Load side
- 8.3 Short-circuit Withstand Capability at Load Side
- 9 Environmental Applicability Test
- 9.1 Vibration Test
- 9.2 High Temperature Test
- 9.3 Low Temperature Test
- 9.4 Alternating Humid Heat Test
- 9.5 Performance requirements for radio resource management
1 Foreword
YD/T 4675-2024 was issued by Ministry of Industry and Information Technology on 29 March 2024 and has been in force since 1 July 2024.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the composition, classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage of 12V DC uninterruptible power supply systems for racks. This standard applies to 12V DC output uninterruptible systems built into the racks of ICT equipment.
YD/T 4675-2024 is filed under Chinese Standard Classification M41, in the field of telecommunications and broadcasting.
This catalogue holds 2,288 other YD/T standards without an ICS number.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
YD/T 1092-2023 — Telecommunication cables - Foamed polyolefin dielectric, corrugated copper-tube outer conductor, 50 Ohm radio-frequency coaxial cable for wireless communications
YD/T 2165-2010 — Technical specification of modular uninterruptible power systems for telecommunications
YD/T 777-2006 — Inversion equipment for telecommunications
YD/T 1817-2026 — DC remote feeding power system for telecommunication equipment
YD/T 1537-2026 — Outdoor cabinets for information and telecommunications system
YD/T 1363.5-2026 — Specification of supervision system for power, air conditioner and environment - Part 5: Access control and control supervision system
5 Classification and status
Chinese Standard Classification (CCS): M 41
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 4675-2024
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 4675-2024
$525.00