YD/T 4618-2023Technical requirements and test methods for optical fiber fusion splicers for communication optical cable lines (English PDF)
通信光缆线路用光纤熔接机技术要求和试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 4618-2023 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 20, 2023
Implementation date
April 1, 2024
Scope
YD/T 4618-2023 is the English-translated version of 通信光缆线路用光纤熔接机技术要求和试验方法.
YD/T 4618-2023 is the Chinese standard "Technical requirements and test methods for optical fiber fusion splicers for communication optical cable lines".
This standard specifies the technical requirements for the splicing process, splicing time, splicing loss, splicing point tension, heating performance, cycle times, environmental adaptability, etc. of quartz single-mode optical fiber splicing machines for communication optical cable lines.
It also describes the corresponding test methods and provides A product classification is developed to facilitate technical regulations. This standard is applicable to the production, testing and acceptance of quartz single-mode optical fiber fusion splicers for communication optical cable lines.
It is not applicable to multi-core optical fiber fusion splicers. Quartz multi-mode fiber fusion splicers can also be used for reference. It was issued by Ministry of Industry and Information Technology. Issued on 2023-12-20, in force from 2024-04-01.
Found what you need?
Document preview — YD/T 4618-2023
National Standard of the People's Republic of China
- ICS
- 33.180.10
- Classification
- M33
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 4618-2023 was issued by Ministry of Industry and Information Technology on 20 December 2023 and has been in force since 1 April 2024.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the technical requirements for the splicing process, splicing time, splicing loss, splicing point tension, heating performance, cycle times, environmental adaptability, etc. of quartz single-mode optical fiber splicing machines for communication optical cable lines. It also describes the corresponding test methods and provides A product classification is developed to facilitate technical regulations. This standard is applicable to the production, testing and acceptance of quartz single-mode optical fiber fusion splicers for communication optical cable lines. It is not applicable to multi-core optical fiber fusion splicers. Quartz multi-mode fiber fusion splicers can also be used for reference.
YD/T 4618-2023 falls under ICS 33.180.10, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
YD/T 2554.1-2013 — Plastic optical fiber connector - Part 1: Type LC
GB/T 9771.1-2008 — Single-mode optical fibres for telecommunication -- Part 1: Characteristics of a dispersion unshifted single-mode optical fibre
GB/T 18480-2001 — Specification for submarine optical fiber cables
YD/T 4611-2023 — Overall technical requirements for software-defined optical network (SDON) management and control system (MCS)
YD/T 4610-2023 — Sliced Packet Network (SPN) fine-grained bearer technical requirements
YD/T 4609-2023 — Slice Packet Network (SPN) Southbound Interface Test Method
5 Classification and status
International classification (ICS): 33.180.10
Chinese Standard Classification (CCS): M 33
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 4618-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 4618-2023
$405.00