Valid

YD/T 4612-2023Technical requirements for time difference return transmission based on satellite and PTP synchronization (English PDF)

基于卫星和PTP同步的时间差值回传技术要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for YD/T 4612-2023 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

December 20, 2023

Implementation date

April 1, 2024

Scope

YD/T 4612-2023 is the English-translated version of 基于卫星和PTP同步的时间差值回传技术要求.

YD/T 4612-2023 is the Chinese standard "Technical requirements for time difference return transmission based on satellite and PTP synchronization".

This standard specifies the time difference between satellite timing and PTP synchronization between the base station and the backhaul network equipment, the message encapsulation, message content and message sending frequency of the backhaul interface protocol, as well as the base station equipment, backhaul network equipment and transmission Requirements for the differential return function of the network management and control system.

This standard is suitable for real-time monitoring of the PTP status of the transmission network and the GNSS and PTP synchronization performance of the base station using the difference between the time acquired by the base station using GNSS and the time acquired by PTP.

It was issued by Ministry of Industry and Information Technology. Issued on 2023-12-20, in force from 2024-04-01.

Found what you need?

Document preview — YD/T 4612-2023

National Standard of the People's Republic of China

ICS
33.040.20
Classification
M33

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Abbreviations
  • 3.1 Terms and definitions
  • 4 General
  • 4.1 Test environment
  • 4.2 UE Information
  • 4.3 Test Implementation
  • 5 Technical requirements

1 Foreword

YD/T 4612-2023 was issued by Ministry of Industry and Information Technology on 20 December 2023 and has been in force since 1 April 2024.

The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard specifies the time difference between satellite timing and PTP synchronization between the base station and the backhaul network equipment, the message encapsulation, message content and message sending frequency of the backhaul interface protocol, as well as the base station equipment, backhaul network equipment and transmission Requirements for the differential return function of the network management and control system. This standard is suitable for real-time monitoring of the PTP status of the transmission network and the GNSS and PTP synchronization performance of the base station using the difference between the time acquired by the base station using GNSS and the time acquired by PTP.

YD/T 4612-2023 falls under ICS 33.040.20, in the field of telecommunications.

This catalogue holds 3,420 other YD/T standards in that field.

In this catalogue, YD/T standards carry edition years from 1982 to 2026.

3 About this standard

Sector: Telecommunication Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 15 pages (approximate)

4 Related standards

Standards on related subjects:

YD/T 2554.1-2013 — Plastic optical fiber connector - Part 1: Type LC

GB/T 9771.1-2008 — Single-mode optical fibres for telecommunication -- Part 1: Characteristics of a dispersion unshifted single-mode optical fibre

GB/T 18480-2001 — Specification for submarine optical fiber cables

YD/T 4611-2023 — Overall technical requirements for software-defined optical network (SDON) management and control system (MCS)

YD/T 4610-2023 — Sliced Packet Network (SPN) fine-grained bearer technical requirements

YD/T 4609-2023 — Slice Packet Network (SPN) Southbound Interface Test Method

5 Classification and status

International classification (ICS): 33.040.20

Chinese Standard Classification (CCS): M 33

Prefix YD/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download YD/T 4612-2023

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YD/T 4612-2023

$210.00