YD/T 4610-2023Sliced Packet Network (SPN) fine-grained bearer technical requirements (English PDF)
切片分组网络(SPN)细粒度承载技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 4610-2023 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 20, 2023
Implementation date
April 1, 2024
Scope
YD/T 4610-2023 is the English-translated version of 切片分组网络(SPN)细粒度承载技术要求.
YD/T 4610-2023 is the Chinese standard "Sliced Packet Network (SPN) fine-grained bearer technical requirements".
This standard specifies the hierarchical model and supported service types of Slice Packet Network (SPN) fine-grained bearer technology in SPN, defines the fine-grained bearer technology frame structure and frame overhead, business mapping multiplexing, and channel cross-functions, and standardizes fine-grained channels.
OAM requirements, fine-grained bearer technology channel protection requirements, management and control functions and network performance, etc. This standard is applicable to the research and development, testing and application of SPN equipment supporting fine-grained bearer technology and miniaturized access SPN equipment within the backbone and metropolitan areas.
It was issued by Ministry of Industry and Information Technology. Issued on 2023-12-20, in force from 2024-04-01.
Found what you need?
Document preview — YD/T 4610-2023
National Standard of the People's Republic of China
- ICS
- 33.040.20
- Classification
- M33
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 4610-2023 was issued by Ministry of Industry and Information Technology on 20 December 2023 and has been in force since 1 April 2024.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the hierarchical model and supported service types of Slice Packet Network (SPN) fine-grained bearer technology in SPN, defines the fine-grained bearer technology frame structure and frame overhead, business mapping multiplexing, and channel cross-functions, and standardizes fine-grained channels. OAM requirements, fine-grained bearer technology channel protection requirements, management and control functions and network performance, etc. This standard is applicable to the research and development, testing and application of SPN equipment supporting fine-grained bearer technology and miniaturized access SPN equipment within the backbone and metropolitan areas.
YD/T 4610-2023 falls under ICS 33.040.20, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
YD/T 2554.1-2013 — Plastic optical fiber connector - Part 1: Type LC
GB/T 9771.1-2008 — Single-mode optical fibres for telecommunication -- Part 1: Characteristics of a dispersion unshifted single-mode optical fibre
GB/T 18480-2001 — Specification for submarine optical fiber cables
YD/T 4612-2023 — Technical requirements for time difference return transmission based on satellite and PTP synchronization
YD/T 4611-2023 — Overall technical requirements for software-defined optical network (SDON) management and control system (MCS)
YD/T 4609-2023 — Slice Packet Network (SPN) Southbound Interface Test Method
5 Classification and status
International classification (ICS): 33.040.20
Chinese Standard Classification (CCS): M 33
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 4610-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 4610-2023
$880.00