YD/T 4551-20235G multi-mode single card terminal equipment testing method (English PDF)
5G多模单卡终端设备测试方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 4551-2023 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 20, 2023
Implementation date
April 1, 2024
Scope
YD/T 4551-2023 is the English-translated version of 5G多模单卡终端设备测试方法.
YD/T 4551-2023 is the Chinese standard "5G multi-mode single card terminal equipment testing method".
This standard specifies the testing methods for 5G multi-mode single-card terminals in terms of basic communication functions, network selection methods, inter-system interoperability, voice solutions, etc. This standard is applicable to the testing and verification of 5G terminals that support stand-alone networking (Stand Alone) and non-stand-alone networking (Non-Stand Alone) in frequency bands below 6 GHz in the enhanced mobile broadband scenario (eMBB).
It was issued by Ministry of Industry and Information Technology. Issued on 2023-12-20, in force from 2024-04-01.
Found what you need?
Document preview — YD/T 4551-2023
National Standard of the People's Republic of China
- ICS
- 33.060.99
- Classification
- M36
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 4551-2023 was issued by Ministry of Industry and Information Technology on 20 December 2023 and has been in force since 1 April 2024.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the testing methods for 5G multi-mode single-card terminals in terms of basic communication functions, network selection methods, inter-system interoperability, voice solutions, etc. This standard is applicable to the testing and verification of 5G terminals that support stand-alone networking (Stand Alone) and non-stand-alone networking (Non-Stand Alone) in frequency bands below 6 GHz in the enhanced mobile broadband scenario (eMBB).
YD/T 4551-2023 falls under ICS 33.060.99, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
YD/T 3711-2020 — Technical requirement of IMS based vehicle eCall system based on public telecommunication network
GB/T 32401-2015 — Technical requirements and measurement methods for VHF/UHF frequency
GB/T 12572-2008 — Universal requirements and measurement methods of parameters for radio transmitting equipment
YD/T 4552.2-2024 — 5G Terminal NR-based Voice Solution (VoNR) Test Method - Part 2: Protocol Conformance Test
YD/T 4553-2023 — 5G multi-mode digital indoor distribution system testing method
YD/T 4552.1-2023 — 5G terminal NR-based voice solution (VoNR) test method - Part 1: Function and performance testing
5 Classification and status
International classification (ICS): 33.060.99
Chinese Standard Classification (CCS): M 36
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 4551-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 4551-2023
$705.00