YD/T 4518.1-2023Electromagnetic compatibility requirements and test methods for composite equipment with integrated communication functions - Part 1: Equipment used in residential, commercial and light industrial environments (English PDF)
集成通信功能的复合型设备的电磁兼容性要求和测试方法 第1部分:用于居住、商业和轻工业环境中的设备
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 4518.1-2023 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 20, 2023
Implementation date
April 1, 2024
Scope
YD/T 4518.1-2023 is the English-translated version of 集成通信功能的复合型设备的电磁兼容性要求和测试方法 第1部分:用于居住、商业和轻工业环境中的设备.
YD/T 4518.1-2023 is the Chinese standard "Electromagnetic compatibility requirements and test methods for composite equipment with integrated communication functions - Part 1: Equipment used in residential, commercial and light industrial environments".
This standard specifies the electromagnetic compatibility (EMC) requirements for composite equipment with integrated communications functions used in residential, commercial and light industrial environments.
This standard only applies to composite devices whose wireless communication functions are within the scope of the standards listed in Article 2.1.2 and whose non-wireless communication functions are within the scope of the standards listed in Article 2.1.3.
This standard does not contain requirements for antenna ports that are suitable for specific purposes, which are typically associated with the efficient use of the radio spectrum.
It was issued by Ministry of Industry and Information Technology. Issued on 2023-12-20, in force from 2024-04-01.
Found what you need?
Document preview — YD/T 4518.1-2023
National Standard of the People's Republic of China
- ICS
- 33.100
- Classification
- M04
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 4518.1-2023 was issued by Ministry of Industry and Information Technology on 20 December 2023 and has been in force since 1 April 2024.
It is one of 2 parts of the YD/T 4518 series.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard specifies the electromagnetic compatibility (EMC) requirements for composite equipment with integrated communications functions used in residential, commercial and light industrial environments. This standard only applies to composite devices whose wireless communication functions are within the scope of the standards listed in Article 2.1.2 and whose non-wireless communication functions are within the scope of the standards listed in Article 2.1.3. This standard does not contain requirements for antenna ports that are suitable for specific purposes, which are typically associated with the efficient use of the radio spectrum.
YD/T 4518.1-2023 falls under ICS 33.100, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Other parts of this standard:
YD/T 4518.2-2023 — Part 2: Equipment used in industrial environments
Standards on related subjects:
YD/T 2583.18-2019 — Requirement and measurement methods of electromagnetic compatibility for cellular mobile telecommunication equipment - Part 18: 5G user equipment and ancillary equipment
YD/T 2583.14-2013 — Requirements and measurement methods of electromagnetic compatibility for cellular mobile telecommunications equipment. Part 14: LTE user equipment and ancillary equipment
YD/T 2436-2012 — Technical requirements and measurement method of the interface of multi mode terminal equipment
YD/T 4517.2-2024 — Electromagnetic compatibility requirements and measurement methods for vehicle networking communication equipment - Part 2: Vehicle-mounted wireless communication terminals
YD/T 4517.1-2024 — Electromagnetic compatibility requirements and measurement methods for vehicle networking communication equipment - Part 1: Roadside wireless communication terminals
5 Classification and status
International classification (ICS): 33.100
Chinese Standard Classification (CCS): M 04
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 4518.1-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 4518.2-2023 — Electromagnetic compatibility requirements and test methods for composite equipment with integrated communication functions - Part 2: Equipment used in industrial environments
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 4518.1-2023
$370.00