Valid

YD/T 4517.1-2024Electromagnetic compatibility requirements and measurement methods for vehicle networking communication equipment - Part 1: Roadside wireless communication terminals (English PDF)

车联网通信设备电磁兼容性要求和测量方法 第1部分:路侧无线通信终端

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for YD/T 4517.1-2024 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

March 29, 2024

Implementation date

July 1, 2024

Scope

YD/T 4517.1-2024 is the English-translated version of 车联网通信设备电磁兼容性要求和测量方法 第1部分:路侧无线通信终端.

YD/T 4517.1-2024 is the Chinese standard "Electromagnetic compatibility requirements and measurement methods for vehicle networking communication equipment - Part 1: Roadside wireless communication terminals".

This standard specifies the electromagnetic compatibility requirements for roadside wireless communication terminal equipment and its auxiliary equipment used in the Internet of Vehicles, including measurement methods, measurement frequency ranges, limits and performance criteria.

This standard applies to roadside wireless communication equipment for the Internet of Vehicles, including vehicle-road wireless communication terminal equipment, wireless intelligent traffic equipment and wireless intelligent monitoring equipment used in the Internet of Vehicles, such as wireless intelligent cameras, wireless signal control equipment and roadside equipment and other wireless communication equipment.

It was issued by Ministry of Industry and Information Technology. Issued on 2024-03-29, in force from 2024-07-01.

Found what you need?

Document preview — YD/T 4517.1-2024

National Standard of the People's Republic of China

Classification
M04

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 2.1 Term
  • 3 Terms and Definitions
  • 3.2 Abbreviations
  • 3.3 Specifications
  • 3.4 Product model and designation
  • 3.5 Product marking
  • 4 Product Classification
  • 4.1 General
  • 4.2 Model and name
  • 4.3 Test Waveform
  • 4.4 Product labelling
  • 5 Requirements
  • 5.2 Chemical components
  • 5.3 SPD Disconnector Inspection
  • 5.4 Environmental protection property
  • 5.5 Material compatibility
  • 5.6 Spurious emission
  • 5.7 Transmit Spectrum Mask
  • 5.8 Time of Rising Edge and Falling Edge
  • 5.9 In-band Flatness
  • 6 Test methods
  • 6.2 Term restrictions
  • 6.3 End-of-manufacturing inspection
  • 6.4 Type inspection
  • 6.5 Phone Program
  • 6.6 OTASP/OTAPA Function
  • 6.7 Processing of PIN
  • 6.8 Fixed Dialing Number (FDN)
  • 6.9 Abbreviated Dialing Number (ADN)
  • 7 Inspection Rules
  • 7.1 Packaging
  • 7.2 Marking
  • 7.3 Transport
  • 7.4 Storage
  • 7.5 Safety Test for Temporary Overvoltage Failure
  • 7.6 Test of Temporary Overvoltage Withstand Characteristic
  • 7.7 SPD Thermal Stability Test
  • 8 Marking, Packing, Transport and Storage
  • 8.1 Voltage Drop Test
  • 8.2 Surge Withstand Capability at Load side
  • 8.3 Short-circuit Withstand Capability at Load Side
  • 9 Environmental Applicability Test
  • 9.1 Vibration Test
  • 9.2 High Temperature Test
  • 9.3 Low Temperature Test
  • 9.4 Alternating Humid Heat Test
  • 9.5 Performance requirements for radio resource management

1 Foreword

YD/T 4517.1-2024 was issued by Ministry of Industry and Information Technology on 29 March 2024 and has been in force since 1 July 2024.

It is one of 4 parts of the YD/T 4517 series.

The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard specifies the electromagnetic compatibility requirements for roadside wireless communication terminal equipment and its auxiliary equipment used in the Internet of Vehicles, including measurement methods, measurement frequency ranges, limits and performance criteria. This standard applies to roadside wireless communication equipment for the Internet of Vehicles, including vehicle-road wireless communication terminal equipment, wireless intelligent traffic equipment and wireless intelligent monitoring equipment used in the Internet of Vehicles, such as wireless intelligent cameras, wireless signal control equipment and roadside equipment and other wireless communication equipment.

YD/T 4517.1-2024 is filed under Chinese Standard Classification M04, in the field of telecommunications and broadcasting.

This catalogue holds 2,288 other YD/T standards without an ICS number.

In this catalogue, YD/T standards carry edition years from 1982 to 2026.

3 About this standard

Sector: Telecommunication Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 15 pages (approximate)

4 Related standards

Other parts of this standard:

YD/T 4517.2-2024 — Part 2: Vehicle-mounted wireless communication terminals

YD/T 4517.3-2023 — Internet of Vehicles communication equipment - Part 3: Vehicle Ethernet communication equipment

YD/T 4517.4-2024 — Part 4: Vehicle-mounted satellite communication equipment

Standards on related subjects:

YD/T 2583.18-2019 — Requirement and measurement methods of electromagnetic compatibility for cellular mobile telecommunication equipment - Part 18: 5G user equipment and ancillary equipment

YD/T 2583.14-2013 — Requirements and measurement methods of electromagnetic compatibility for cellular mobile telecommunications equipment. Part 14: LTE user equipment and ancillary equipment

YD/T 2436-2012 — Technical requirements and measurement method of the interface of multi mode terminal equipment

5 Classification and status

Chinese Standard Classification (CCS): M 04

Prefix YD/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download YD/T 4517.1-2024

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YD/T 4517.1-2024

$330.00