YD/T 4426-2023Bit index based display replication network traffic engineering technical requirements (English PDF)
基于位索引的显示复制网络流量工程技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 4426-2023 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
July 28, 2023
Implementation date
November 1, 2023
Scope
YD/T 4426-2023 is the English-translated version of 基于位索引的显示复制网络流量工程技术要求.
YD/T 4426-2023 is the Chinese standard "Bit index based display replication network traffic engineering technical requirements".
This standard specifies the technical requirements for display replication network traffic engineering based on bit index, analyzes the networking architecture of display replication network traffic engineering based on bit index, and formulates the data plane, control plane and deterministic technical requirements.
This standard is applicable to bit index-based display replication network traffic engineering networking application scenarios. It was issued by Ministry of Industry and Information Technology. Issued on 2023-07-28, in force from 2023-11-01.
Found what you need?
Document preview — YD/T 4426-2023
National Standard of the People's Republic of China
- Classification
- M32
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Term
- 3 Terms and Definitions
- 3.2 Abbreviations
- 3.3 Specifications
- 3.4 Product model and designation
- 3.5 Product marking
- 4 Product Classification
- 4.1 General
- 4.2 Model and name
- 4.3 Test Waveform
- 4.4 Product labelling
- 5 Requirements
- 5.2 Chemical components
- 5.3 SPD Disconnector Inspection
- 5.4 Environmental protection property
- 5.5 Material compatibility
- 5.6 Spurious emission
- 5.7 Transmit Spectrum Mask
- 5.8 Time of Rising Edge and Falling Edge
- 5.9 In-band Flatness
- 6 Test methods
- 6.2 Term restrictions
- 6.3 End-of-manufacturing inspection
- 6.4 Type inspection
- 6.5 Phone Program
- 6.6 OTASP/OTAPA Function
- 6.7 Processing of PIN
- 6.8 Fixed Dialing Number (FDN)
- 6.9 Abbreviated Dialing Number (ADN)
- 7 Inspection Rules
- 7.1 Packaging
- 7.2 Marking
- 7.3 Transport
- 7.4 Storage
- 7.5 Safety Test for Temporary Overvoltage Failure
- 7.6 Test of Temporary Overvoltage Withstand Characteristic
- 7.7 SPD Thermal Stability Test
- 8 Marking, Packing, Transport and Storage
- 8.1 Voltage Drop Test
- 8.2 Surge Withstand Capability at Load side
- 8.3 Short-circuit Withstand Capability at Load Side
- 9 Environmental Applicability Test
- 9.1 Vibration Test
- 9.2 High Temperature Test
- 9.3 Low Temperature Test
- 9.4 Alternating Humid Heat Test
- 9.5 Performance requirements for radio resource management
1 Foreword
YD/T 4426-2023 was issued by Ministry of Industry and Information Technology on 28 July 2023 and has been in force since 1 November 2023.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the technical requirements for display replication network traffic engineering based on bit index, analyzes the networking architecture of display replication network traffic engineering based on bit index, and formulates the data plane, control plane and deterministic technical requirements. This standard is applicable to bit index-based display replication network traffic engineering networking application scenarios.
YD/T 4426-2023 is filed under Chinese Standard Classification M32, in the field of telecommunications and broadcasting.
This catalogue holds 2,288 other YD/T standards without an ICS number.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
YD/T 2375-2019 — Technical requirements for high accuracy time synchronization
JT/T 1076-2016 — GNSS System for Operating Vehicles - Technical Specifications for Vehicle Video Terminal
YD/T 2554.1-2013 — Plastic optical fiber connector - Part 1: Type LC
YD/T 4427-2023 — Network modeling technical specifications under the framework of Traffic Cyber-Physical System (T-CPS)
YD/T 4421-2023 — SR-based multicast technical requirements
YD/T 4418-2023 — Overall architecture and technical requirements of deterministic IP networks for telecommunications networks
5 Classification and status
Chinese Standard Classification (CCS): M 32
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 4426-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 4426-2023
$510.00