Valid

YD/T 4377.1-2023Optical transceiver integrated module software management interface - Part 1: SFP/SFP+/SFP28 (English PDF)

光收发合一模块软件管理接口 第1部分:SFP/SFP+/SFP28

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for YD/T 4377.1-2023 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

July 28, 2023

Implementation date

November 1, 2023

Scope

YD/T 4377.1-2023 is the English-translated version of 光收发合一模块软件管理接口 第1部分:SFP/SFP+/SFP28.

YD/T 4377.1-2023 is the Chinese standard "Optical transceiver integrated module software management interface - Part 1: SFP/SFP+/SFP28".

This standard specifies the software management interface for optical transceiver modules using small form factor hot pluggable (SFP), enhanced small form factor hot pluggable (SFP+), and 25Gbit/s small form factor hot pluggable (SFP28) packages., including the architecture of the optical module software management interface, two-wire interface communication requirements, interface function requirements and register address table.

This standard applies to the design and inspection of optical transceiver modules in SFP/SFP+/SFP28 packages. It was issued by Ministry of Industry and Information Technology. Issued on 2023-07-28, in force from 2023-11-01.

Found what you need?

Document preview — YD/T 4377.1-2023

National Standard of the People's Republic of China

ICS
33.180.01
Classification
M33

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Abbreviations
  • 3.1 Terms and definitions
  • 4 General
  • 4.1 Test environment
  • 4.2 UE Information
  • 4.3 Test Implementation
  • 5 Technical requirements

1 Foreword

YD/T 4377.1-2023 was issued by Ministry of Industry and Information Technology on 28 July 2023 and has been in force since 1 November 2023.

It is one of 3 parts of the YD/T 4377 series.

The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard specifies the software management interface for optical transceiver modules using small form factor hot pluggable (SFP), enhanced small form factor hot pluggable (SFP+), and 25Gbit/s small form factor hot pluggable (SFP28) packages., including the architecture of the optical module software management interface, two-wire interface communication requirements, interface function requirements and register address table. This standard applies to the design and inspection of optical transceiver modules in SFP/SFP+/SFP28 packages.

YD/T 4377.1-2023 falls under ICS 33.180.01, in the field of telecommunications.

This catalogue holds 3,420 other YD/T standards in that field.

In this catalogue, YD/T standards carry edition years from 1982 to 2026.

3 About this standard

Sector: Telecommunication Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 15 pages (approximate)

4 Related standards

Other parts of this standard:

YD/T 4377.2-2024 — Optical transceiver module software management interface - Part 2: QSFP /QSFP28

YD/T 4377.3-2024 — Optical transceiver module software management interface - Part 3: QSFP-DD/OSFP

Standards on related subjects:

YD/T 2554.1-2013 — Plastic optical fiber connector - Part 1: Type LC

GB/T 9771.1-2008 — Single-mode optical fibres for telecommunication -- Part 1: Characteristics of a dispersion unshifted single-mode optical fibre

GB/T 18480-2001 — Specification for submarine optical fiber cables

YD/T 4378.3-2026 — Coherent driver modulator subassembly - Part 3: 1.2Tb/s

5 Classification and status

International classification (ICS): 33.180.01

Chinese Standard Classification (CCS): M 33

Prefix YD/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download YD/T 4377.1-2023

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YD/T 4377.1-2023

$530.00