YD/T 4271-2023Technical requirements for automatic quality measurement of in-band flow information in telecom operators' networks (English PDF)
电信运营商网络带内流信息的自动化质量测量技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 4271-2023 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
April 21, 2023
Implementation date
August 1, 2023
Scope
YD/T 4271-2023 is the English-translated version of 电信运营商网络带内流信息的自动化质量测量技术要求.
YD/T 4271-2023 is the Chinese standard "Technical requirements for automatic quality measurement of in-band flow information in telecom operators' networks".
This standard specifies the technical requirements for automated quality measurement of in-band flow information in telecom operators' networks, including IFIT architecture, key technologies and technical requirements, and provides typical application scenarios.
This standard is applicable to the automated quality measurement of data plane in-band flow information in multi-type service bearer scenarios on operator networks, and guides the development, testing and deployment of IFIT functions of IP network equipment.
It was issued by Ministry of Industry and Information Technology. Issued on 2023-04-21, in force from 2023-08-01.
Found what you need?
Document preview — YD/T 4271-2023
National Standard of the People's Republic of China
- ICS
- 30.040.35
- Classification
- L78
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Requirements
1 Foreword
YD/T 4271-2023 was issued by Ministry of Industry and Information Technology on 21 April 2023 and has been in force since 1 August 2023.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the technical requirements for automated quality measurement of in-band flow information in telecom operators' networks, including IFIT architecture, key technologies and technical requirements, and provides typical application scenarios. This standard is applicable to the automated quality measurement of data plane in-band flow information in multi-type service bearer scenarios on operator networks, and guides the development, testing and deployment of IFIT functions of IP network equipment.
YD/T 4271-2023 is filed under Chinese Standard Classification L78, in the field of electronic components and information technology.
This catalogue holds 2,288 other YD/T standards without an ICS number.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
CJ/T 188-2018 — Technical requirements of utility meters data transmission
YDC 079-2009 — Technical Specifications and Testing Methods of Wireless LAN for Mobile Terminals
YD/T 4272-2023 — Enhanced virtual private network (VPN+) technical requirements
YD/T 4269-2023 — IP network in-band operation, administration and maintenance (IOAM) data content and encapsulation method
YD/T 4263-2023 — TTP model of SDN-based data center OpenFlow switch
5 Classification and status
International classification (ICS): 30.040.35
Chinese Standard Classification (CCS): L 78
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 4271-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 4271-2023
$210.00