YD/T 4179-202330MHz~1GHz Micro-power short-distance radio transmission equipment RF test method (English PDF)
30MHz~1GHz微功率短距离无线电发射设备射频测试方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 4179-2023 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
April 21, 2023
Implementation date
August 1, 2023
Scope
YD/T 4179-2023 is the English-translated version of 30MHz~1GHz微功率短距离无线电发射设备射频测试方法.
YD/T 4179-2023 is the Chinese standard "30MHz~1GHz Micro-power short-distance radio transmission equipment RF test method".
This standard specifies the duty cycle, transmit power, transmit power spectral density, frequency tolerance, occupied bandwidth, and single transmission duration of signals transmitted by 30MHz to 1GHz micropower short-distance radio transmitting equipment (hereinafter referred to as "micropower equipment"), test methods for interval between two launches, pre-launch search, frequency of use, spurious radiated emissions and conducted disturbance emissions.
This standard applies to the management of research and development, production, acceptance and use of micropower equipment from 30MHz to 1GHz. It was issued by Ministry of Industry and Information Technology. Issued on 2023-04-21, in force from 2023-08-01.
Found what you need?
Document preview — YD/T 4179-2023
National Standard of the People's Republic of China
- ICS
- 33.060.99
- Classification
- M36
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 4179-2023 was issued by Ministry of Industry and Information Technology on 21 April 2023 and has been in force since 1 August 2023.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the duty cycle, transmit power, transmit power spectral density, frequency tolerance, occupied bandwidth, and single transmission duration of signals transmitted by 30MHz to 1GHz micropower short-distance radio transmitting equipment (hereinafter referred to as "micropower equipment"), test methods for interval between two launches, pre-launch search, frequency of use, spurious radiated emissions and conducted disturbance emissions. This standard applies to the management of research and development, production, acceptance and use of micropower equipment from 30MHz to 1GHz.
YD/T 4179-2023 falls under ICS 33.060.99, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
YD/T 3711-2020 — Technical requirement of IMS based vehicle eCall system based on public telecommunication network
GB/T 32401-2015 — Technical requirements and measurement methods for VHF/UHF frequency
GB/T 12572-2008 — Universal requirements and measurement methods of parameters for radio transmitting equipment
YD/T 4180-2023 — 1GHz ~ 40GHz micro-power short-distance radio transmission equipment radio frequency test method
YD/T 4178-2023 — 9kHz ~ 30MHz micro-power short-distance radio transmission equipment radio frequency test method
YD/T 4188-2023 — Technical requirements for voice service interconnection based on WLAN access to LTE network
5 Classification and status
International classification (ICS): 33.060.99
Chinese Standard Classification (CCS): M 36
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 4179-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 4179-2023
$240.00