YD/T 3994-2021LTE-based broadband trunking communication (B-TrunC) system (second stage) interface test method Terminal to trunking core network interface (English PDF)
基于LTE技术的宽带集群通信(B-TrunC)系统(第二阶段)接口测试方法 终端到集群核心网接口
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 3994-2021 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 2, 2021
Implementation date
April 1, 2022
Scope
YD/T 3994-2021 is the English-translated version of 基于LTE技术的宽带集群通信(B-TrunC)系统(第二阶段)接口测试方法 终端到集群核心网接口.
YD/T 3994-2021 is the Chinese standard "LTE-based broadband trunking communication (B-TrunC) system (second stage) interface test method Terminal to trunking core network interface".
This standard specifies the test content and test configuration, EMM process test, and TSM process test of the broadband trunking communication (B-TrunC) system (second phase) based on LTE technology from the terminal to the cluster core network interface.
This standard applies to terminals and core network equipment for broadband trunking communications (B-TrunC) based on LTE technology. It was issued by Ministry of Industry and Information Technology. Issued on 2021-12-02, in force from 2022-04-01.
Found what you need?
Document preview — YD/T 3994-2021
National Standard of the People's Republic of China
- ICS
- 33.060.99
- Classification
- M36
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 3994-2021 was issued by Ministry of Industry and Information Technology on 2 December 2021 and has been in force since 1 April 2022.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the test content and test configuration, EMM process test, and TSM process test of the broadband trunking communication (B-TrunC) system (second phase) based on LTE technology from the terminal to the cluster core network interface. This standard applies to terminals and core network equipment for broadband trunking communications (B-TrunC) based on LTE technology.
YD/T 3994-2021 falls under ICS 33.060.99, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
YD/T 3711-2020 — Technical requirement of IMS based vehicle eCall system based on public telecommunication network
GB/T 32401-2015 — Technical requirements and measurement methods for VHF/UHF frequency
GB/T 12572-2008 — Universal requirements and measurement methods of parameters for radio transmitting equipment
YD/T 4002-2024 — 5G digital cellular mobile communication network enhanced mobile broadband terminal equipment test method (Phase I)
YD/T 3996-2021 — Technical requirements for source address verification in Ethernet access mode DHCPv6 scenario
YD/T 3995-2021 — Technical requirements for source address verification in Ethernet access mode DHCPv4 scenario
5 Classification and status
International classification (ICS): 33.060.99
Chinese Standard Classification (CCS): M 36
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 3994-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 3994-2021
$2,375.00