YD/T 3932-2021LTE/CDMA/TD-SCDMA/WCDMA/GSM (GPRS) multi-dual card multi-standby terminal protocol module test method (English PDF)
LTE/CDMA/TD-SCDMA/WCDMA/GSM(GPRS)多模双卡多待终端协议一致性测试方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 3932-2021 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
August 21, 2021
Implementation date
November 1, 2021
Scope
YD/T 3932-2021 is the English-translated version of LTE/CDMA/TD-SCDMA/WCDMA/GSM(GPRS)多模双卡多待终端协议一致性测试方法.
YD/T 3932-2021 is the Chinese standard "LTE/CDMA/TD-SCDMA/WCDMA/GSM (GPRS) multi-dual card multi-standby terminal protocol module test method".
This standard specifies the consistency test method for the service capabilities of terminal equipment supporting LTE /CDMA /TD-SCDMA/WCDMA/GSM (GPRS) multi-mode dual-card multi-standby under dual-card slots and different user card combinations.
This standard applies to LTE/CDMA/TD-SCDMA/WCDMA/GSM(GPRS) multi-mode dual-card multi-standby terminal equipment. It was issued by Ministry of Industry and Information Technology. Issued on 2021-08-21, in force from 2021-11-01.
Found what you need?
Document preview — YD/T 3932-2021
National Standard of the People's Republic of China
- ICS
- 33.060.20
- Classification
- M37
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 3932-2021 was issued by Ministry of Industry and Information Technology on 21 August 2021 and has been in force since 1 November 2021.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the consistency test method for the service capabilities of terminal equipment supporting LTE /CDMA /TD-SCDMA/WCDMA/GSM (GPRS) multi-mode dual-card multi-standby under dual-card slots and different user card combinations. This standard applies to LTE/CDMA/TD-SCDMA/WCDMA/GSM(GPRS) multi-mode dual-card multi-standby terminal equipment.
YD/T 3932-2021 falls under ICS 33.060.20, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
YD/T 2576.1-2013 — Test method for user equipment of TD-LTE digital cellular mobile telecommunication network (Phase 1) - Part 1: Basic operation, services and reliability test
YD/T 2576.2-2013 — Test method for user equipment of TD-LTE digital cellular mobile telecommunication network (phase 1) - Part 2: Radio transmission and reception performance test
YD/T 2307-2011 — Technical requirement and testing methods for general function of mobile telecommunication terminal
YD/T 3935.3-2021 — Compliance requirements for electromagnetic radiation of mobile communication terminal equipment - Part 3: Wearable devices
YD/T 3934-2021 — General technical requirements for satellite communication earth stations used in Ka microwave mobile
YD/T 3933-2021 — General technical requirements for satellite communication earth stations used in Ka microwave stationary
5 Classification and status
International classification (ICS): 33.060.20
Chinese Standard Classification (CCS): M 37
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 3932-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 3932-2021
$1,475.00