YD/T 3722-2020RF technical requirements and test methods of 230MHz band wideband wireless data transmission system (English PDF)
230MHz频段宽带无线数据传输系统的射频技术要求及测试方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 3722-2020 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
January 1, 2020
Implementation date
July 1, 2020
Scope
YD/T 3722-2020 is the English-translated version of 230MHz频段宽带无线数据传输系统的射频技术要求及测试方法.
YD/T 3722-2020 is the Chinese standard "RF technical requirements and test methods of 230MHz band wideband wireless data transmission system".
This standard specifies the frequency tolerance, frequency range, working bandwidth, occupied bandwidth, port transmit power, working frequency of the access equipment and terminal equipment of broadband wireless data transmission system using carrier aggregation technology working in the frequency bands of 223-226MHz and 229-233MHz.
Radio frequency specification requirements and corresponding test methods for unwanted emission within the frequency band, emission outside the operating frequency band, transmitter spurious emission, peak spectral efficiency, and radiated spurious at the chassis port.
This standard applies to broadband wireless data transmission system equipment operating in the frequency range of 223MHz to 235MHz. It was issued by Ministry of Industry and Information Technology.
Found what you need?
Document preview — YD/T 3722-2020
National Standard of the People's Republic of China
- ICS
- 33.060.20
- Classification
- M36
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 3722-2020 is issued by Ministry of Industry and Information Technology.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the frequency tolerance, frequency range, working bandwidth, occupied bandwidth, port transmit power, working frequency of the access equipment and terminal equipment of broadband wireless data transmission system using carrier aggregation technology working in the frequency bands of 223-226MHz and 229-233MHz. Radio frequency specification requirements and corresponding test methods for unwanted emission within the frequency band, emission outside the operating frequency band, transmitter spurious emission, peak spectral efficiency, and radiated spurious at the chassis port. This standard applies to broadband wireless data transmission system equipment operating in the frequency range of 223MHz to 235MHz.
YD/T 3722-2020 falls under ICS 33.060.20, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
Chinese original: about 23,210 characters
4 Related standards
Standards on related subjects:
YD/T 3711-2020 — Technical requirement of IMS based vehicle eCall system based on public telecommunication network
GB/T 32401-2015 — Technical requirements and measurement methods for VHF/UHF frequency
GB/T 12572-2008 — Universal requirements and measurement methods of parameters for radio transmitting equipment
YD/T 2844.1-2026 — Trusted Environment of Mobile Phone - Part 1: General Technical Requirement
YD/T 3730-2020 — VHF/UHF radio direction finding system multipath propagation immunity test procedure
YD/T 3725-2020 — Technical requirements for NB-IoT network management for IoT
5 Classification and status
International classification (ICS): 33.060.20
Chinese Standard Classification (CCS): M 36
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 3722-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 3722-2020
$315.00