Valid

YD/T 3691.3-2020Technical requirements for access network 10Gbit/s symmetric passive optical network (XGS-PON) - Part 3: Transmission and convergence (TC) layer requirements (English PDF)

接入网技术要求 10Gbit/s对称无源光网络(XGS-PON) 第3部分:传输汇聚(TC)层要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (21 pages)

Need quotation for your management?

Get a formal quotation for YD/T 3691.3-2020 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

January 1, 2020

Implementation date

July 1, 2020

Scope

YD/T 3691.3-2020 is the English-translated version of 接入网技术要求 10Gbit/s对称无源光网络(XGS-PON) 第3部分:传输汇聚(TC)层要求.

YD/T 3691.3-2020 is the Chinese standard "Technical requirements for access network 10Gbit/s symmetric passive optical network (XGS-PON) - Part 3: Transmission and convergence (TC) layer requirements".

This standard specifies the transmission convergence (TC) layer protocol, resource allocation and quality of service, transmission convergence layer framing, encapsulation method, physical (PHY) adaptation sublayer, PLOAM message channel, ONU activation, OLT and Timing relationship between ONUs, performance management, security requirements, power consumption management, etc. This standard is applicable to XGS-PON equipment in the public telecommunication network environment, and can also be used by reference to the private telecommunication network. It was issued by Ministry of Industry and Information Technology.

Found what you need?

Document preview — YD/T 3691.3-2020

National Standard of the People's Republic of China

ICS
33.040.50
Classification
M42

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Abbreviations
  • 3.1 Terms and definitions
  • 4 General
  • 4.1 Test environment
  • 4.2 UE Information
  • 4.3 Test Implementation
  • 5 Technical requirements

1 Foreword

YD/T 3691.3-2020 is issued by Ministry of Industry and Information Technology.

It is one of 3 parts of the YD/T 3691 series.

The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard specifies the transmission convergence (TC) layer protocol, resource allocation and quality of service, transmission convergence layer framing, encapsulation method, physical (PHY) adaptation sublayer, PLOAM message channel, ONU activation, OLT and Timing relationship between ONUs, performance management, security requirements, power consumption management, etc. This standard is applicable to XGS-PON equipment in the public telecommunication network environment, and can also be used by reference to the private telecommunication network.

YD/T 3691.3-2020 falls under ICS 33.040.50, in the field of telecommunications.

This catalogue holds 3,420 other YD/T standards in that field.

In this catalogue, YD/T standards carry edition years from 1982 to 2026.

3 About this standard

Sector: Telecommunication Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 21 pages (approximate)

Chinese original: about 31,379 characters

4 Related standards

Other parts of this standard:

YD/T 3691.1-2020 — Part 1: General requirements

YD/T 3691.2-2020 — Symmetric Passive Optical Network (XGS-PON) - Part 2: Physical media related (PMD) layer requirements

Standards on related subjects:

YD/T 1092-2023 — Telecommunication cables - Foamed polyolefin dielectric, corrugated copper-tube outer conductor, 50 Ohm radio-frequency coaxial cable for wireless communications

YD/T 2165-2010 — Technical specification of modular uninterruptible power systems for telecommunications

YD/T 841-1996 — Underground communication pipe with plastic pipe

YD/T 2019.6-2026 — Test method for broadband customer networking based on public telecommunication network - Part 6: Fiber-To-The-Room (FTTR) residential equipment

5 Classification and status

International classification (ICS): 33.040.50

Chinese Standard Classification (CCS): M 42

Prefix YD/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.

How to Download YD/T 3691.3-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
21 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YD/T 3691.3-2020

$435.00