Valid

YD/T 3679-2020VoLTE core network management interface information model (English PDF)

VoLTE核心网网络管理接口信息模型

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for YD/T 3679-2020 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

January 1, 2020

Implementation date

July 1, 2020

Scope

YD/T 3679-2020 is the English-translated version of VoLTE核心网网络管理接口信息模型.

YD/T 3679-2020 is the Chinese standard "VoLTE core network management interface information model". This standard specifies the information model of the VoLTE core network, mainly involving network element types such as CSCF, BGCF, IMSHSS, SBC, IMSMGW and MGCF, including performance measurement data and network configuration resources.

This standard is applicable to the VoLTE core network range of FDD mode and TDD mode, and is limited to a single VoLTE networking scenario. It was issued by Ministry of Industry and Information Technology.

Found what you need?

Document preview — YD/T 3679-2020

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 2.1 Term
  • 3 Terms and Definitions
  • 3.2 Abbreviations
  • 3.3 Specifications
  • 3.4 Product model and designation
  • 3.5 Product marking
  • 4 Product Classification
  • 4.1 General
  • 4.2 Model and name
  • 4.3 Test Waveform
  • 4.4 Product labelling
  • 5 Requirements
  • 5.2 Chemical components
  • 5.3 SPD Disconnector Inspection
  • 5.4 Environmental protection property
  • 5.5 Material compatibility
  • 5.6 Spurious emission
  • 5.7 Transmit Spectrum Mask
  • 5.8 Time of Rising Edge and Falling Edge
  • 5.9 In-band Flatness
  • 6 Test methods
  • 6.2 Term restrictions
  • 6.3 End-of-manufacturing inspection
  • 6.4 Type inspection
  • 6.5 Phone Program
  • 6.6 OTASP/OTAPA Function
  • 6.7 Processing of PIN
  • 6.8 Fixed Dialing Number (FDN)
  • 6.9 Abbreviated Dialing Number (ADN)
  • 7 Inspection Rules
  • 7.1 Packaging
  • 7.2 Marking
  • 7.3 Transport
  • 7.4 Storage
  • 7.5 Safety Test for Temporary Overvoltage Failure
  • 7.6 Test of Temporary Overvoltage Withstand Characteristic
  • 7.7 SPD Thermal Stability Test
  • 8 Marking, Packing, Transport and Storage
  • 8.1 Voltage Drop Test
  • 8.2 Surge Withstand Capability at Load side
  • 8.3 Short-circuit Withstand Capability at Load Side
  • 9 Environmental Applicability Test
  • 9.1 Vibration Test
  • 9.2 High Temperature Test
  • 9.3 Low Temperature Test
  • 9.4 Alternating Humid Heat Test
  • 9.5 Performance requirements for radio resource management

1 Foreword

YD/T 3679-2020 is issued by Ministry of Industry and Information Technology.

The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard specifies the information model of the VoLTE core network, mainly involving network element types such as CSCF, BGCF, IMSHSS, SBC, IMSMGW and MGCF, including performance measurement data and network configuration resources. This standard is applicable to the VoLTE core network range of FDD mode and TDD mode, and is limited to a single VoLTE networking scenario.

YD/T 3679-2020 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 6,667 other YD/T standards.

Of the 4,379 YD/T standards that do carry an ICS number, 3,421 (78%) fall under ICS 33, in the field of telecommunications.

3 About this standard

Sector: Telecommunication Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 15 pages (approximate)

4 Related standards

Standards on related subjects:

JB 2293-1978 — Wind tunnel test method of radiator of automobile and tractor

YD/T 4044-2022 — Technical requirements for AI-based knowledge graph construction

YD/T 3689-2020 — Broadband customer network based on public telecommunications network Visible light and power line fusion Link layer technical requirements

YD/T 3680-2020 — Technical requirements for wireless multi-system access platform (POI) network management interface

5 Classification and status

Prefix YD/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download YD/T 3679-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YD/T 3679-2020

$1,925.00