YD/T 3639-2020Mitigation measures for interference from wireless devices to wired terminals and cables used in broadband customer networks (English PDF)
无线设备对宽带客户网络用有线终端和电缆的干扰缓解措施
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 3639-2020 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
January 1, 2020
Implementation date
July 1, 2020
Scope
YD/T 3639-2020 is the English-translated version of 无线设备对宽带客户网络用有线终端和电缆的干扰缓解措施.
YD/T 3639-2020 is the Chinese standard "Mitigation measures for interference from wireless devices to wired terminals and cables used in broadband customer networks".
This standard specifies guidelines for interference mitigation measures to address interference from wireless devices connected to broadband customer networks and/or between broadband customer network terminals and cables, and in a home network environment.
It also specifies technical means applied to cables and connected to broadband customer networks for resolving interference, as well as mitigation measures to address wireless interference.
This standard applies to the mitigation of interference from wireless devices in the home environment. It was issued by Ministry of Industry and Information Technology.
Found what you need?
Document preview — YD/T 3639-2020
National Standard of the People's Republic of China
- ICS
- 33.050.01
- Classification
- M40
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 3639-2020 is issued by Ministry of Industry and Information Technology.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies guidelines for interference mitigation measures to address interference from wireless devices connected to broadband customer networks and/or between broadband customer network terminals and cables, and in a home network environment. It also specifies technical means applied to cables and connected to broadband customer networks for resolving interference, as well as mitigation measures to address wireless interference. This standard applies to the mitigation of interference from wireless devices in the home environment.
YD/T 3639-2020 falls under ICS 33.050.01, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
Chinese original: about 22,214 characters
4 Related standards
Standards on related subjects:
YD/T 993-2016 — The technical requirements and test methods of overvoltage and overcurrent resistibility for wire telecommunication terminal equipment
YD/T 868-2007 — Technical requirements and measuring methods for additional equipment of telephone set
GB/T 15279-2002 — The specifications of automatic telephone set
YD/T 6092-2024 — Technical requirements and test methods for wide-angle shooting assistance capabilities of mobile communication terminals
YD/T 4676.1-2024 — Effects of particle radiation on telecommunication systems and equipment - Part 1: General
YD/T 4203-2023 — Lightning protection and grounding technical requirements for telecommunications Internet data center infrastructure
5 Classification and status
International classification (ICS): 33.050.01
Chinese Standard Classification (CCS): M 40
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 3639-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 3639-2020
$330.00