YD/T 3436.6-2025Accessories for aerial telecommunication line - Part 6: Wedge shape strain clamp for self-supporting optical fibre cables (English PDF)
架空通信线路配件 第6部分:自承式光缆楔形耐张夹具
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 3436.6-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
July 2, 2025
Implementation date
November 1, 2025
Scope
YD/T 3436.6-2025 is the English-translated version of 架空通信线路配件 第6部分:自承式光缆楔形耐张夹具.
YD/T 3436.6-2025 is the Chinese standard "Accessories for aerial telecommunication line - Part 6: Wedge shape strain clamp for self-supporting optical fibre cables".
This standard specifies the product classification and models, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage of wedge-shaped tension clamps for self-supporting optical cables.
This standard applies to the design, production, and inspection of wedge-shaped clamps used in overhead scenarios such as figure-eight self-supporting outdoor optical cables, all-dielectric self-supporting optical cables (ADSS), and lightweight optical cables for access networks in communication lines.
It does not apply to wedge-shaped clamps used in drop cables for in-home access sections. It was issued by Ministry of Industry and Information Technology. Issued on 2025-07-02, in force from 2025-11-01.
Found what you need?
Document preview — YD/T 3436.6-2025
National Standard of the People's Republic of China
- ICS
- 33.040.50
- Classification
- M42
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 3436.6-2025 was issued by Ministry of Industry and Information Technology on 2 July 2025 and has been in force since 1 November 2025.
It is one of 6 parts of the YD/T 3436 series.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard specifies the product classification and models, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage of wedge-shaped tension clamps for self-supporting optical cables. This standard applies to the design, production, and inspection of wedge-shaped clamps used in overhead scenarios such as figure-eight self-supporting outdoor optical cables, all-dielectric self-supporting optical cables (ADSS), and lightweight optical cables for access networks in communication lines. It does not apply to wedge-shaped clamps used in drop cables for in-home access sections.
YD/T 3436.6-2025 falls under ICS 33.040.50, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Other parts of this standard:
YD/T 3436.1-2018 — Part 1: General technical requirements
YD/T 3436.2-2018 — Accessories for aerial-telecommunication line--Part 3: Hanger class
YD/T 3436.3-2018 — Accessories for aerial-telecommunication line--Part 3: Hanger class
YD/T 3436.4-2019 — Overhead communication line accessories. Part 4: Hoops, optical cable reserved bracket
YD/T 3436.5-2024 — Overhead communication line accessories - Part 5: Ground anchors and ground rods
Standards on related subjects:
YD/T 1092-2023 — Telecommunication cables - Foamed polyolefin dielectric, corrugated copper-tube outer conductor, 50 Ohm radio-frequency coaxial cable for wireless communications
YD/T 2165-2010 — Technical specification of modular uninterruptible power systems for telecommunications
YD/T 841-1996 — Underground communication pipe with plastic pipe
5 Classification and status
International classification (ICS): 33.040.50
Chinese Standard Classification (CCS): M 42
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 3436.6-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 3436.5-2024 — Overhead communication line accessories - Part 5: Ground anchors and ground rods
YD/T 3436.4-2019 — Overhead communication line accessories. Part 4: Hoops, optical cable reserved bracket
YD/T 3436.3-2018 — Accessories for aerial-telecommunication line--Part 3: Hanger class
YD/T 3436.6-2025
$315.00