YD/T 2607-2013Test method of adaption layer of No.7 signalling system interworking with IP-Message Transfer Part (MTP) level 3 user adaptation layer (M3UA) (English PDF)
No.7信令与IP互通适配层测试方法 消息传递部分(MTP)第三级用户适配层(M3UA)
This is a limited preview
Buy now to download the full PDF (166 pages)
Need quotation for your management?
Get a formal quotation for YD/T 2607-2013 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
January 1, 2013
Implementation date
January 1, 2013
Scope
YD/T 2607-2013 is the English-translated version of No.7信令与IP互通适配层测试方法 消息传递部分(MTP)第三级用户适配层(M3UA).
YD/T 2607-2013 is the Chinese standard "Test method of adaption layer of No.7 signalling system interworking with IP-Message Transfer Part (MTP) level 3 user adaptation layer (M3UA)".
This standard specifies (according to work is divided into transfer mode and proxy mode), test procedures and test methods for SG AS and IPSP used M3UA protocol.
This standard applies to the use of M3UA protocol signaling gateways, softswitch equipment. It was issued by Ministry of Industry and Information Technology. It cites 1 other standard.
Found what you need?
Document preview — YD/T 2607-2013
National Standard of the People's Republic of China
- ICS
- 33.040.30
- Classification
- M10
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 2607-2013 was issued by Ministry of Industry and Information Technology on 17 October 2013.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 166 pages in English translation.
2 Scope Preview
This standard specifies (according to work is divided into transfer mode and proxy mode), test procedures and test methods for SG AS and IPSP used M3UA protocol. This standard applies to the use of M3UA protocol signaling gateways, softswitch equipment.
YD/T 2607-2013 falls under ICS 33.040.30, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document.
YD/T 2606-2013 — Technical requirements of adaptation layer for No.7 signalling interworking with IP Message transfer part (MTP) level 3 user adaptation layer (M3UA)
4 About this standard
Issued by: Ministry of Industry and Information Technology
English translation: about 166 pages (approximate)
5 Related standards
Standards on related subjects:
GB/T 47325-2026 — Security technical requirements and test methods for over-the-air updates in the internet of vehicles
GB/T 47324-2026 — Cybersecurity protection requirements for internet of vehicles platforms
YD/T 1730-2008 — Implementation Guide for Security Risk Assessment of Telecom Network and Internet
YD/T 6017.6-2026 — The capability evaluation system of cyber security product - Part 6: Evaluation method of cyber deception (honeypot)
YD/T 6017.4-2026 — The capability evaluation system of cyber security products - Part 4: Security products testing methods based on deployment methods
YD/T 2606-2013 — Technical requirements of adaptation layer for No.7 signalling interworking with IP Message transfer part (MTP) level 3 user adaptation layer (M3UA)
6 Classification and status
International classification (ICS): 33.040.30
Chinese Standard Classification (CCS): M 10
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 166 pages — is available in the English PDF.
Referenced standards
How to Download YD/T 2607-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 2606-2013 — Technical requirements of adaptation layer for No.7 signalling interworking with IP Message transfer part (MTP) level 3 user adaptation layer (M3UA)
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
Secure payment via Stripe
Payments accepted
YD/T 2607-2013
$3,260.00