YD/T 2605-2013Test method of adaption layer of No.7 signalling interworking with IP-message transfer part (MTP) level 2 peer-to-peer adaption layer (English PDF)
No.7信令与IP互通适配层测试方法 消息传递部分(MTP)第二级对等适配层(M2PA)
This is a limited preview
Buy now to download the full PDF (46 pages)
Need quotation for your management?
Get a formal quotation for YD/T 2605-2013 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
January 1, 2013
Implementation date
January 1, 2013
Scope
YD/T 2605-2013 is the English-translated version of No.7信令与IP互通适配层测试方法 消息传递部分(MTP)第二级对等适配层(M2PA).
YD/T 2605-2013 is the Chinese standard "Test method of adaption layer of No.7 signalling interworking with IP-message transfer part (MTP) level 2 peer-to-peer adaption layer".
This standard specifies the test methods M2PA Agreement, including the test structure, the link state control, the transmission fault, processor fault control, the transmission and reception control (basic methods) and congestion control test content.
It was issued by Ministry of Industry and Information Technology. It cites 2 other standards.
Found what you need?
Document preview — YD/T 2605-2013
National Standard of the People's Republic of China
- ICS
- 33.040.30
- Classification
- M12
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 2605-2013 was issued by Ministry of Industry and Information Technology on 17 October 2013.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 46 pages in English translation.
2 Scope Preview
This standard specifies the test methods M2PA Agreement, including the test structure, the link state control, the transmission fault, processor fault control, the transmission and reception control (basic methods) and congestion control test content.
YD/T 2605-2013 falls under ICS 33.040.30, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document.
YD/T 2604
IETF DRAFT-BIDULOCK-SIGTRAN-M2PA-TEXT-08
4 About this standard
Issued by: Ministry of Industry and Information Technology
English translation: about 46 pages (approximate)
5 Related standards
Standards on related subjects:
GB/T 41301-2022 — Management requirements of IPv6 address in intelligent manufacturing environments
YD/T 1730-2008 — Implementation Guide for Security Risk Assessment of Telecom Network and Internet
YD/T 1548.1-2007 — 2GHz WCDMA digital cellular mobile communication network terminal equipment testing method (second stage) - Part 1: Basic functions, operations and performance testing
YD/T 4189-2023 — Quality requirements and test methods for non-point-to-point short message inter-network forwarding in number portability
YD/T 4185-2023 — Implementation requirements for interworking between IMS networks
YD/T 2604-2013 — Technical requirements of adaptation layer of No.7 signalling interworking with IP. MTP2 peer-to-peer adaptation layer
6 Classification and status
International classification (ICS): 33.040.30
Chinese Standard Classification (CCS): M 12
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 46 pages — is available in the English PDF.
Referenced standards
Normative references
IETF DRAFT-BIDULOCK-SIGTRAN-M2PA-TEXT-08
How to Download YD/T 2605-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 2604-2013 — Technical requirements of adaptation layer of No.7 signalling interworking with IP. MTP2 peer-to-peer adaptation layer
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 2605-2013
$1,110.00