YD/T 2563.2-2013LTE FDD digital cellular mobile communication network-Uu interface physical layer technical requirement(Phase 1). Part 2: Physical Channels and Modulation (English PDF)
LTE FDD数字蜂窝移动通信网 Uu接口物理层技术要求(第一阶段) 第2部分:物理信道和调制
This is a limited preview
Buy now to download the full PDF (46 pages)
Need quotation for your management?
Get a formal quotation for YD/T 2563.2-2013 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
January 1, 2013
Implementation date
January 1, 2013
Scope
YD/T 2563.2-2013 is the English-translated version of LTE FDD数字蜂窝移动通信网 Uu接口物理层技术要求(第一阶段) 第2部分:物理信道和调制.
YD/T 2563.2-2013 is the Chinese standard "LTE FDD digital cellular mobile communication network-Uu interface physical layer technical requirement(Phase 1). Part 2: Physical Channels and Modulation".
This standard specifies each physical channel LTE FDD digital cellular mobile communication network Uu interface. This standard applies to LTE FDD digital cellular mobile communications network.
It was issued by Ministry of Industry and Information Technology. It cites 1 other standard.
Found what you need?
Document preview — YD/T 2563.2-2013
National Standard of the People's Republic of China
- ICS
- 33.060.99
- Classification
- M36
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 2563.2-2013 is issued by Ministry of Industry and Information Technology.
It is one of 5 parts of the YD/T 2563 series.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard specifies each physical channel LTE FDD digital cellular mobile communication network Uu interface. This standard applies to LTE FDD digital cellular mobile communications network.
YD/T 2563.2-2013 falls under ICS 33.060.99, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document.
YD/T 2563.4
4 Where this standard sits
It cites one other standard, YD/T 2563.4, listed in full above.
2 other standards in this catalogue cite it, among them YD/T 2563.1-2013, YD/T 2563.5-2013.
It is one part of the YD/T 2563 series, of which this catalogue holds 5 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology
English translation: about 46 pages (approximate)
6 Related standards
Other parts of this standard:
YD/T 2563.1-2013 — Part 1: general description
YD/T 2563.3-2013 — LTE FDD digitsl cellular mobile communication network-Uu interface physical layer technical requirement(Phase 1). Part 3: Multiplexing and Channel Coding
YD/T 2563.4-2013 — LTE FDD digital cellular mobile communication network-Uu interface physical layer technical requirement (Phase 1). Part 4: Physical Layer Procedure
YD/T 2563.5-2013 — LTE FDD digital cellular mobile communication network-Uu interface physical layer technical requiremenT (Phase 1). Part 5: Physical Layer Measurement
Standards on related subjects:
GB/T 32401-2015 — Technical requirements and measurement methods for VHF/UHF frequency
YD/T 2689-2014 — Technical Requirement for LTE based Broadband Trunking Communication(B-TrunC)
GB/T 12572-2008 — Universal requirements and measurement methods of parameters for radio transmitting equipment
7 Classification and status
International classification (ICS): 33.060.99
Chinese Standard Classification (CCS): M 36
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 46 pages — is available in the English PDF.
Referenced standards
Normative references
Cited by
- YD/T 2563.1-2013LTE FDD digital cellular mobile communication network-Uu interface physical layer technical requirement(Phase 1). Part 1: general description
- YD/T 2563.4-2013LTE FDD digital cellular mobile communication network-Uu interface physical layer technical requirement (Phase 1). Part 4: Physical Layer Procedure
- YD/T 2563.5-2013LTE FDD digital cellular mobile communication network-Uu interface physical layer technical requiremenT (Phase 1). Part 5: Physical Layer Measurement
- YD/T 2564.1-2013LTE FDD digital cellular mobile telecommunication network Uu interface layer two technical requirement (phase 1). Part 1: MAC protocol
How to Download YD/T 2563.2-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 2563.4-2013 — LTE FDD digital cellular mobile communication network-Uu interface physical layer technical requirement (Phase 1). Part 4: Physical Layer Procedure
YD/T 2563.3-2013 — LTE FDD digitsl cellular mobile communication network-Uu interface physical layer technical requirement(Phase 1). Part 3: Multiplexing and Channel Coding
YD/T 2563.1-2013 — LTE FDD digital cellular mobile communication network-Uu interface physical layer technical requirement(Phase 1). Part 1: general description
YD/T 2563.2-2013
$1,439.00