YD/T 2562.2-2013TD-LTE digital cellular mobile communication network Uu interface layer three technical requirement (Phase 1). Part 2: User Equipment (UE) procedures in idle mode (English PDF)
TD-LTE数字蜂窝移动通信网 Uu接口层三技术要求(第一阶段) 第2部分:空闲模式下的UE过程
This is a limited preview
Buy now to download the full PDF (19 pages)
Need quotation for your management?
Get a formal quotation for YD/T 2562.2-2013 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
January 1, 2013
Implementation date
January 1, 2013
Scope
YD/T 2562.2-2013 is the English-translated version of TD-LTE数字蜂窝移动通信网 Uu接口层三技术要求(第一阶段) 第2部分:空闲模式下的UE过程.
YD/T 2562.2-2013 is the Chinese standard "TD-LTE digital cellular mobile communication network Uu interface layer three technical requirement (Phase 1). Part 2: User Equipment (UE) procedures in idle mode".
This standard specifies the procedures in idle mode UE access layer (AS) part. Idle mode procedures of non-access stratum (NAS) part is not described in this standard.
This standard describes the functional model of the UE divided between NAS and S. It was issued by Ministry of Industry and Information Technology. It cites 1 other standard.
Found what you need?
Document preview — YD/T 2562.2-2013
National Standard of the People's Republic of China
- ICS
- 33.060.99
- Classification
- M36
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 2562.2-2013 is issued by Ministry of Industry and Information Technology.
It is one of 2 parts of the YD/T 2562 series.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard specifies the procedures in idle mode UE access layer (AS) part. Idle mode procedures of non-access stratum (NAS) part is not described in this standard. This standard describes the functional model of the UE divided between NAS and S.
YD/T 2562.2-2013 falls under ICS 33.060.99, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document.
YD/T 2562.1-2013 — Technical requirement for TD-LTE digital cellular mobile telecommunication network Uu interface layer three(phase 1). Part 1: RRC protocol
4 Where this standard sits
It cites one other standard, YD/T 2562.1-2013, listed in full above.
One other standard in this catalogue cites it: YD/T 2741-2014.
It is one part of the YD/T 2562 series, of which this catalogue holds 2 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology
English translation: about 19 pages (approximate)
6 Related standards
Other parts of this standard:
YD/T 2562.1-2013 — Technical requirement for TD-LTE digital cellular mobile telecommunication network Uu interface layer three(phase 1). Part 1: RRC protocol
Standards on related subjects:
GB/T 32401-2015 — Technical requirements and measurement methods for VHF/UHF frequency
YD/T 2689-2014 — Technical Requirement for LTE based Broadband Trunking Communication(B-TrunC)
GB/T 12572-2008 — Universal requirements and measurement methods of parameters for radio transmitting equipment
YD/T 2574-2017 — LTEFDD digital cellular mobile telecommunication network. Testmethod of eNodeB equipment(Phase 1)
YD/T 2573-2017 — LTE FDD digital cellular mobile telecommunication network. Technical requirement of eNodeB equipment(Phase 1)
7 Classification and status
International classification (ICS): 33.060.99
Chinese Standard Classification (CCS): M 36
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 19 pages — is available in the English PDF.
Referenced standards
Normative references
How to Download YD/T 2562.2-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 2562.1-2013 — Technical requirement for TD-LTE digital cellular mobile telecommunication network Uu interface layer three(phase 1). Part 1: RRC protocol
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 2562.2-2013
$600.00