YD/T 2560.2-2013TD-LTE digital cellular mobile communication network. Uu interface physical layer technical requirement(Phase 1). Part 2: Physical Channels and Modulation (English PDF)
TD-LTE数字蜂窝移动通信网 Uu接口物理层技术要求(第一阶段) 第2部分:物理信道和调制
This is a limited preview
Buy now to download the full PDF (48 pages)
Need quotation for your management?
Get a formal quotation for YD/T 2560.2-2013 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
January 1, 2013
Implementation date
January 1, 2013
Scope
YD/T 2560.2-2013 is the English-translated version of TD-LTE数字蜂窝移动通信网 Uu接口物理层技术要求(第一阶段) 第2部分:物理信道和调制.
YD/T 2560.2-2013 is the Chinese standard "TD-LTE digital cellular mobile communication network. Uu interface physical layer technical requirement(Phase 1). Part 2: Physical Channels and Modulation".
This standard specifies each physical channel TD-LTE digital cellular mobile communication network Uu interface. This standard applies to TD-LTE digital cellular mobile communications network.
It was issued by Ministry of Industry and Information Technology. It cites 1 other standard.
Found what you need?
Document preview — YD/T 2560.2-2013
National Standard of the People's Republic of China
- ICS
- 33.060.99
- Classification
- M36
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 2560.2-2013 is issued by Ministry of Industry and Information Technology.
It is one of 5 parts of the YD/T 2560 series.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard specifies each physical channel TD-LTE digital cellular mobile communication network Uu interface. This standard applies to TD-LTE digital cellular mobile communications network.
YD/T 2560.2-2013 falls under ICS 33.060.99, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document.
YD/T 2560.4
4 Where this standard sits
It cites one other standard, YD/T 2560.4, listed in full above.
4 other standards in this catalogue cite it, among them YD/T 2560.1-2013, YD/T 2560.5-2013, YD/T 2561.1-2013.
It is one part of the YD/T 2560 series, of which this catalogue holds 5 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology
English translation: about 48 pages (approximate)
6 Related standards
Other parts of this standard:
YD/T 2560.1-2013 — Part 1: general description
YD/T 2560.3-2013 — Part 3: Multiplexing and Channel Coding
YD/T 2560.4-2013 — TD-LTE digital cellular mobile telecommunication network. Uu interface physical layer technical requirement (phase 1). Part 4: physical layer procedure
YD/T 2560.5-2013 — TD-LTE digital cellular mobile communication network-Uu interface physical layer technical requiremen(Phase 1). Part 5: Physical Layer Measurement
Standards on related subjects:
GB/T 32401-2015 — Technical requirements and measurement methods for VHF/UHF frequency
YD/T 2689-2014 — Technical Requirement for LTE based Broadband Trunking Communication(B-TrunC)
GB/T 12572-2008 — Universal requirements and measurement methods of parameters for radio transmitting equipment
7 Classification and status
International classification (ICS): 33.060.99
Chinese Standard Classification (CCS): M 36
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 48 pages — is available in the English PDF.
Referenced standards
Normative references
Cited by
- YD/T 2741-2014Technical Specification for Uu-T Interface of LTE based Broadband Trunking Communication (B-Trunc) System (Phase 1)
- YD/T 2560.1-2013TD-LTE digital cellular mobile communication network. Uu interface physical layer technical requirement(Phase 1). Part 1: general description
- YD/T 2560.3-2013TD-LTE digital cellular mobile communication network. Uu interface physical layer technical requirement(Phase 1). Part 3: Multiplexing and Channel Coding
- YD/T 2560.4-2013TD-LTE digital cellular mobile telecommunication network. Uu interface physical layer technical requirement (phase 1). Part 4: physical layer procedure
- YD/T 2560.5-2013TD-LTE digital cellular mobile communication network-Uu interface physical layer technical requiremen(Phase 1). Part 5: Physical Layer Measurement
- YD/T 2561.1-2013TD-LTE digital cellular mobile telecommunication network. Uu interface layer two technical requirement (Phase 1). Part 1: MAC protocal
How to Download YD/T 2560.2-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 2560.4-2013 — TD-LTE digital cellular mobile telecommunication network. Uu interface physical layer technical requirement (phase 1). Part 4: physical layer procedure
YD/T 2560.3-2013 — TD-LTE digital cellular mobile communication network. Uu interface physical layer technical requirement(Phase 1). Part 3: Multiplexing and Channel Coding
YD/T 2560.1-2013 — TD-LTE digital cellular mobile communication network. Uu interface physical layer technical requirement(Phase 1). Part 1: general description
YD/T 2560.2-2013
$1,529.00