YD/T 1484.10-2025Measurement method for radiated RF power and receiver performance of wireless device - Part 10: Cat1bis wireless device (English PDF)
无线终端空间射频辐射功率和接收机性能测量方法第10部分:Cat1bis无线终端
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 1484.10-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 17, 2025
Implementation date
April 1, 2026
Scope
YD/T 1484.10-2025 is the English-translated version of 无线终端空间射频辐射功率和接收机性能测量方法第10部分:Cat1bis无线终端.
YD/T 1484.10-2025 is the Chinese standard "Measurement method for radiated RF power and receiver performance of wireless device - Part 10: Cat1bis wireless device".
This standard specifies the measurement methods for the spatial radio frequency radiated power and receiver performance of Cat1bis wireless terminals, including frequency ranges and limits.
This standard applies to over-the-air (OTA) testing of wireless terminals equipped with Cat1bis communication modules. It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-04-01.
Found what you need?
Document preview — YD/T 1484.10-2025
National Standard of the People's Republic of China
- ICS
- 33.100
- Classification
- K04
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 1484.10-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 April 2026.
It is one of 12 parts of the YD/T 1484 series.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard specifies the measurement methods for the spatial radio frequency radiated power and receiver performance of Cat1bis wireless terminals, including frequency ranges and limits. This standard applies to over-the-air (OTA) testing of wireless terminals equipped with Cat1bis communication modules.
YD/T 1484.10-2025 falls under ICS 33.100, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Other parts of this standard:
YD/T 1484-2006 — Measurement method for radiated RF power and receiver performance of mobile stations
YD/T 1484-2011 — Measurement method for radiated RF power and receiver performance of mobile stations
YD/T 1484.1-2016 — Part 1:General requirement
YD/T 1484.1-2023 — Wireless terminal space radio frequency radiated power and receiver performance measurement methods - Part 1: General requirements
YD/T 1484.2-2016 — Part 2: GSM wireless device
YD/T 1484.4-2017 — Part 4: WCDMA wireless device
YD/T 1484.5-2016 — Specification for cables on board rolling stock - Part 2: 30kVsingle phase power cables
YD/T 1484.5.5-2016 — Radio-radio-radio power and receiver performance measurement methods - Part 5: TD-SCDMA wireless terminal
YD/T 1484.6-2013 — Measurement method for radiated RF power and receiver performance of wireless device. Part 6: LTE wireless device
YD/T 1484.6-2021 — Wireless terminal space radio frequency radiation power and performance measurement method - Part 6: LTE wireless terminal
YD/T 1484.9-2023 — Wireless terminal space radio frequency radiation power and receiver performance measurement method - Part 9: 5G NR wireless terminal (Sub-6GHz)
Standards on related subjects:
GB/T 2423.101-2025 — Environmental testing - Part 2: Test methods - Test: Inclinations and swings
GB/T 2423.10-2019 — Environmental testing - Part 2: Test methods - Test Fc: Vibration (sinusoidal)
GB/T 2423.1-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
5 Classification and status
International classification (ICS): 33.100
Chinese Standard Classification (CCS): K 04
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 1484.10-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1484.9-2023 — Wireless terminal space radio frequency radiation power and receiver performance measurement method - Part 9: 5G NR wireless terminal (Sub-6GHz)
YD/T 1484.6-2013 — Measurement method for radiated RF power and receiver performance of wireless device. Part 6: LTE wireless device
YD/T 1484.6-2021 — Wireless terminal space radio frequency radiation power and performance measurement method - Part 6: LTE wireless terminal
YD/T 1484.10-2025
$240.00