YD/T 1331-2004Technical requirements of Service Switching Point (SSP) equipment for Wireless Intelligent Network (WIN). Phase2: In 800MHz CDMA digital cellular mobile telecommunication network (English PDF)
800MHz CDMA数字蜂窝移动通信网无线智能网(WIN)阶段2:业务交换点(SSP)设备技术要求
This is a limited preview
Buy now to download the full PDF (30 pages)
Need quotation for your management?
Get a formal quotation for YD/T 1331-2004 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 22, 2004
Implementation date
March 1, 2005
Scope
YD/T 1331-2004 is the English-translated version of 800MHz CDMA数字蜂窝移动通信网无线智能网(WIN)阶段2:业务交换点(SSP)设备技术要求.
YD/T 1331-2004 is the Chinese standard "Technical requirements of Service Switching Point (SSP) equipment for Wireless Intelligent Network (WIN). Phase2: In 800MHz CDMA digital cellular mobile telecommunication network".
This standard specifies the 800MHz CDMA digital cellular mobile communication network Wireless Intelligent Network (WIN) The second stage of the service switching point (SSP) for the technical requirements, including SSP functionality of the device, the interface protocols, signaling tie, billing, maintenance, measurement and other technical requirements.
This standard applies to 800MHz CDMA digital cellular mobile communication network Intelligent Network (WIN) Phase 2 of the service switching point (SSP) devices. Issued on 2004-12-22, in force from 2005-03-01.
Found what you need?
Document preview — YD/T 1331-2004
National Standard of the People's Republic of China
- ICS
- 33.070
- Classification
- M37
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 1331-2004 was issued by Ministry of Industry and Information Technology on 22 December 2004 and has been in force since 1 March 2005.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 30 pages in English translation.
2 Scope Preview
This standard specifies the 800MHz CDMA digital cellular mobile communication network Wireless Intelligent Network (WIN) The second stage of the service switching point (SSP) for the technical requirements, including SSP functionality of the device, the interface protocols, signaling tie, billing, maintenance, measurement and other technical requirements. This standard applies to 800MHz CDMA digital cellular mobile communication network Intelligent Network (WIN) Phase 2 of the service switching point (SSP) devices.
YD/T 1331-2004 falls under ICS 33.070, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 30 pages (approximate)
Chinese original: about 44,486 characters
4 Related standards
Standards on related subjects:
YD 1268.1-2003 — [YD/T 1268.1-2003] The safety specification and test method for lithium batteries
YD 1268.2-2003 — [YD/T 1268.2-2003] The safety specification and test method for lithium battery charger
YD/T 6502-2025 — Calibration procedures of electromagnetic field sensors and probes (excluding antennas)from 9kHz to 40GHz
YD/T 6501.1-2025 — Antenna performance requirement and measurement method for civil robots integrated with wireless communication technology - Part 1: General requirement
YD/T 2869.3-2025 — Performance requirement and measurement method for MIMO antenna terminal Part 3: 5G NR wireless terminal (mmWave)
5 Classification and status
International classification (ICS): 33.070
Chinese Standard Classification (CCS): M 37
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.
How to Download YD/T 1331-2004
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 1331-2004
$525.00