YD/T 1312.4-2004Requirements and measurement methods of electromagnetic compatibility for radio communication equipment. Part 4: radio paging system (English PDF)

1 Foreword

YD/T 1312.4-2004 was issued by Ministry of Industry and Information Technology on 9 October 2004 and has been in force since 1 March 2005.

It is one of 17 parts of the YD/T 1312 series.

2 Scope

This standard specifies the wireless paging device and its associated auxiliary equipment, electromagnetic compatibility (EMC) requirements, including limits, performance criteria and measurement methods, etc. In addition to this standard applies to all types of outside broadcast receiver radio paging systems.

3 About this standard

Sector: Telecommunication Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 14 pages (approximate)

Chinese original: about 21,286 characters

4 Related standards

Other parts of this standard:

YD/T 1312.1-2025 — Requirements and measurement methods of electromagnetic compatibility for radio communication equipment - Part 1: Common technical requirements

YD/T 1312.2-2004 — Part 2: wideband radio equipment

YD/T 1312.3-2004 — Part 3: Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech)

YD/T 1312.5-2004 — Part 5: Radio Frequency (RF) audio link equipment and wireless microphones

YD/T 1312.6-2004 — Part 6: available amateur radio equipment

YD/T 1312.7-2004 — Part 7: trucked radio (TETRA) equipment

YD/T 1312.9-2007 — Requirements and Measurement Methods of Electromagnetic Compatibility for Radio Communication Equipment. Part 9: 400/1800 MHz SDMA Radio Access System: User Equipment and Ancillary Equipment

YD/T 1312.10-2007 — Requirements and Measurement Methods of Electromagnetic Compatibility for Radio Communication Equipment. Part 10: 400/1800 MHz SDMA Radio Access System: Base Station, Repeater, Base Station Controller and Ancillary Equipment

YD/T 1312.11-2026 — Requirements and measurement methods of electromagnetic compatibility for radio communication equipment - Part 11: Fixed broadband wireless access system user equipment and its ancillary equipment

YD/T 1312.12-2012 — Part 12: fixed broadband wireless access system basestation and its ancillary equipment

YD/T 1312.13-2026 — Requirements and measurement methods of electromagnetic compatibility for radio communication equipment - Part 13: Power adapter of mobile telecommunication terminal equipement

YD/T 1312.14-2012 — Requirements and measurements methods of electromagnetic compatibility for radio communication equipment. Part 14: very small aperture teiminal, satellite interactive earth stations (operated in the frequency ranges between 4GHz and 30GHz in the fixed sat

YD/T 1312.15-2026 — Requirements and measurement methods of electromagnetic compatibility for radio communication equipment - Part 15: Ultra wide band (UWB) communications devices

YD/T 1312.16-2015 — The wireless communication device electromagnetic compatibility requirements and measuring methods - Part 16: Mobile Satellite Communication System terminal earth stations

YD/T 1312.17-2023 — Electromagnetic compatibility requirements and measurement methods for wireless communication equipment - Part 17: Very low power active medical implantable devices and related peripheral equipment

YD/T 1312.21-2024 — Requirements and measurement methods for electromagnetic compatibility of wireless communication equipment - Part 21: S-band satellite communication terminals and their ancillary equipment

5 Classification and status

International classification (ICS): 33.060

Chinese Standard Classification (CCS): M 36

Prefix YD/T: recommended standard.