Valid

YD/T 1312.17-2023Electromagnetic compatibility requirements and measurement methods for wireless communication equipment - Part 17: Very low power active medical implantable devices and related peripheral equipment (English PDF)

无线通信设备电磁兼容性要求和测量方法 第17部分:甚低功率活性医用植入设备以及相关外围设备

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for YD/T 1312.17-2023 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

December 20, 2023

Implementation date

April 1, 2024

Scope

YD/T 1312.17-2023 is the English-translated version of 无线通信设备电磁兼容性要求和测量方法 第17部分:甚低功率活性医用植入设备以及相关外围设备.

YD/T 1312.17-2023 is the Chinese standard "Electromagnetic compatibility requirements and measurement methods for wireless communication equipment - Part 17: Very low power active medical implantable devices and related peripheral equipment".

This standard specifies the electromagnetic compatibility (EMC) requirements for very low-power active medical implantable devices and related peripheral equipment, including limits, test conditions, performance criteria and measurement methods.

This standard applies to various types of active medical implantable devices and related peripheral devices defined in Appendix A. It was issued by Ministry of Industry and Information Technology. Issued on 2023-12-20, in force from 2024-04-01.

Found what you need?

Document preview — YD/T 1312.17-2023

National Standard of the People's Republic of China

ICS
33.100
Classification
L06

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Abbreviations
  • 3.1 Terms and definitions
  • 4 General
  • 4.1 Test environment
  • 4.2 UE Information
  • 4.3 Test Implementation
  • 5 Technical requirements

1 Foreword

YD/T 1312.17-2023 was issued by Ministry of Industry and Information Technology on 20 December 2023 and has been in force since 1 April 2024.

It is one of 22 parts of the YD/T 1312 series.

The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard specifies the electromagnetic compatibility (EMC) requirements for very low-power active medical implantable devices and related peripheral equipment, including limits, test conditions, performance criteria and measurement methods. This standard applies to various types of active medical implantable devices and related peripheral devices defined in Appendix A.

YD/T 1312.17-2023 falls under ICS 33.100, in the field of telecommunications.

This catalogue holds 3,420 other YD/T standards in that field.

In this catalogue, YD/T standards carry edition years from 1982 to 2026.

3 About this standard

Sector: Telecommunication Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 15 pages (approximate)

4 Related standards

Other parts of this standard:

YD/T 1312.1-2004 — Requirements and measurement methods of electromagnetic compatibility for radio communication equipment Part 1: common technical requirements

YD/T 1312.1-2008 — Requirements and Measurement Methods of Electromagnetic Compatibility for Radio Communication Equipment. Part 1: Common Technical Requirements

YD/T 1312.1-2015 — Requirements and measurement methods of electromagnetic compatibility for radio communication equipment Part 1: Common technical requirements

YD/T 1312.1-2025 — Requirements and measurement methods of electromagnetic compatibility for radio communication equipment - Part 1: Common technical requirements

YD/T 1312.2-2004 — Requirements and measurement methods of electromagnetic compatibility for radio communication equipment. Part 2: wideband radio equipment

YD/T 1312.3-2004 — Requirements and measurement methods of electromagnetic compatibility for radio communication equipment. Part 3: Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech)

YD/T 1312.4-2004 — Requirements and measurement methods of electromagnetic compatibility for radio communication equipment. Part 4: radio paging system

YD/T 1312.5-2004 — Requirements and measurement methods of electromagnetic compatibility for radio communication equipment. Part 5: Radio Frequency (RF) audio link equipment and wireless microphones

YD/T 1312.6-2004 — Requirements and measurement methods of electromagnetic compatibility for radio communication equipment. Part 6: available amateur radio equipment

YD/T 1312.7-2004 — Requirements and measurement methods of electromagnetic compatibility for radio communication equipment. Part 7: trucked radio (TETRA) equipment

YD/T 1312.8-2004 — Requirements and measurement methods of electromagnetic compatibility for radio communication equipment Part 8: Short Range Devices (SRD) (9kHz~40GHz)

YD/T 1312.8-2012 — Requirements and measurement methods of electromagnetic compatibility for radio communication equipment. Part 8: short range devices (SRD) (9kHz~40GHz)

YD/T 1312.9-2007 — Requirements and Measurement Methods of Electromagnetic Compatibility for Radio Communication Equipment. Part 9: 400/1800 MHz SDMA Radio Access System: User Equipment and Ancillary Equipment

YD/T 1312.10-2007 — Requirements and Measurement Methods of Electromagnetic Compatibility for Radio Communication Equipment. Part 10: 400/1800 MHz SDMA Radio Access System: Base Station, Repeater, Base Station Controller and Ancillary Equipment

YD/T 1312.11-2026 — Requirements and measurement methods of electromagnetic compatibility for radio communication equipment - Part 11: Fixed broadband wireless access system user equipment and its ancillary equipment

YD/T 1312.12-2012 — Requirements and measurement methods of electromagnetic compatibility for radio communication equipment. Part 12: fixed broadband wireless access system basestation and its ancillary equipment

YD/T 1312.13-2026 — Requirements and measurement methods of electromagnetic compatibility for radio communication equipment - Part 13: Power adapter of mobile telecommunication terminal equipement

YD/T 1312.14-2012 — Requirements and measurements methods of electromagnetic compatibility for radio communication equipment. Part 14: very small aperture teiminal, satellite interactive earth stations (operated in the frequency ranges between 4GHz and 30GHz in the fixed sat

YD/T 1312.15-2026 — Requirements and measurement methods of electromagnetic compatibility for radio communication equipment - Part 15: Ultra wide band (UWB) communications devices

YD/T 1312.16-2015 — The wireless communication device electromagnetic compatibility requirements and measuring methods - Part 16: Mobile Satellite Communication System terminal earth stations

YD/T 1312.21-2024 — Requirements and measurement methods for electromagnetic compatibility of wireless communication equipment - Part 21: S-band satellite communication terminals and their ancillary equipment

Standards on related subjects:

GB 4343.1-2024 — Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

YD/T 983-2013 — Limits and methods of measurement of electromagnetic compatibility of telecommunicatin power supply equipment

GB/T 4365-2003 — Electrotechnical terminology -- Electromagnetic compatibility

5 Classification and status

International classification (ICS): 33.100

Chinese Standard Classification (CCS): L 06

Prefix YD/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download YD/T 1312.17-2023

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YD/T 1312.17-2023

$635.00