YD/T 1306-2004800MHz CDMA digital cellular mobile communication network Wireless Intelligent Network (WIN). Phase 1: Test method for prepaid charging service (English PDF)
800MHz CDMA数字蜂窝移动通信网无线智能网(WIN)阶段1:预付费业务测试方法
This is a limited preview
Buy now to download the full PDF (97 pages)
Need quotation for your management?
Get a formal quotation for YD/T 1306-2004 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
February 9, 2004
Implementation date
February 9, 2004
Scope
YD/T 1306-2004 is the English-translated version of 800MHz CDMA数字蜂窝移动通信网无线智能网(WIN)阶段1:预付费业务测试方法.
YD/T 1306-2004 is the Chinese standard "800MHz CDMA digital cellular mobile communication network Wireless Intelligent Network (WIN). Phase 1: Test method for prepaid charging service".
This standard specifies the wireless intelligent network service switching point (SSP), Service Control Point (SCP), Intelligent Peripheral (IP) and home location register (HLR) equipment operation and the parameters associated with these operations, error, result, application physical procedures used by the TCAP service test project.
This standard test items for each operation is divided into effective and ineffective behavioral testing behavioral tests.
This standard applies to "800MHz CDMA digital cellular mobile communication network Wireless Intelligent Network (WIN) Stage 1: Pre-paid business and technical requirements" provides prepaid business service switching point (SSP), Service Control Point (SCP), Intelligent Peripheral (IP) and home location register (HLR) equipment. Issued on 2004-02-09, in force from 2004-02-09.
Found what you need?
Document preview — YD/T 1306-2004
National Standard of the People's Republic of China
- ICS
- 33.070.99
- Classification
- M37
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 1306-2004 was issued by Ministry of Industry and Information Technology on 9 February 2004 and took effect the same day.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 97 pages in English translation.
2 Scope Preview
This standard specifies the wireless intelligent network service switching point (SSP), Service Control Point (SCP), Intelligent Peripheral (IP) and home location register (HLR) equipment operation and the parameters associated with these operations, error, result, application physical procedures used by the TCAP service test project. This standard test items for each operation is divided into effective and ineffective behavioral testing behavioral tests. This standard applies to "800MHz CDMA digital cellular mobile communication network Wireless Intelligent Network (WIN) Stage 1: Pre-paid business and technical requirements" provides prepaid business service switching point (SSP), Service Control Point (SCP), Intelligent Peripheral (IP) and home location register (HLR) equipment.
YD/T 1306-2004 falls under ICS 33.070.99, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 97 pages (approximate)
Chinese original: about 146,151 characters
4 Related standards
Standards on related subjects:
YD 1268.1-2003 — [YD/T 1268.1-2003] The safety specification and test method for lithium batteries
YD 1268.2-2003 — [YD/T 1268.2-2003] The safety specification and test method for lithium battery charger
YD/T 6502-2025 — Calibration procedures of electromagnetic field sensors and probes (excluding antennas)from 9kHz to 40GHz
YD/T 6501.1-2025 — Antenna performance requirement and measurement method for civil robots integrated with wireless communication technology - Part 1: General requirement
YD/T 2869.3-2025 — Performance requirement and measurement method for MIMO antenna terminal Part 3: 5G NR wireless terminal (mmWave)
5 Classification and status
International classification (ICS): 33.070.99
Chinese Standard Classification (CCS): M 37
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 97 pages — is available in the English PDF.
How to Download YD/T 1306-2004
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 1306-2004
$1,850.00