YD/T 1281-2003Local telecommunications cable for broadband applications, polyolefin insulated copper conductors, laminated aluminium polyethylene sheath (English PDF)
适于宽带应用的铜芯聚烯烃绝缘铝塑综合护套市内通信电缆
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 1281-2003 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
July 7, 2003
Implementation date
July 7, 2003
Scope
YD/T 1281-2003 is the English-translated version of 适于宽带应用的铜芯聚烯烃绝缘铝塑综合护套市内通信电缆.
YD/T 1281-2003 is the Chinese standard "Local telecommunications cable for broadband applications, polyolefin insulated copper conductors, laminated aluminium polyethylene sheath".
This standard provides for broadband applications Copper polyolefin insulated aluminum sheathed local communication cable requirements, test methods, inspection rules, marking, packaging and storage, etc. This standard specifies the maximum transmission frequency cables are 30MHz and 100MHz.
This standard is applicable for broadband applications Copper polyolefin insulated aluminum sheathed local communication cable manufacture, acceptance and use. The cables are suitable for remote optical network unit to the transmission system between users, as well as building cabling system transmission between building subsystems. Issued on 2003-07-07, in force from 2003-07-07.
Found what you need?
Document preview — YD/T 1281-2003
National Standard of the People's Republic of China
- ICS
- 33.120.20
- Classification
- K13
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 1281-2003 was issued by Ministry of Industry and Information Technology on 7 July 2003 and took effect the same day.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard provides for broadband applications Copper polyolefin insulated aluminum sheathed local communication cable requirements, test methods, inspection rules, marking, packaging and storage, etc. This standard specifies the maximum transmission frequency cables are 30MHz and 100MHz. This standard is applicable for broadband applications Copper polyolefin insulated aluminum sheathed local communication cable manufacture, acceptance and use. The cables are suitable for remote optical network unit to the transmission system between users, as well as building cabling system transmission between building subsystems.
YD/T 1281-2003 falls under ICS 33.120.20, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
Chinese original: about 22,220 characters
4 Related standards
Standards on related subjects:
GB/T 2951.21-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 21: Methods specific to elastomeric compounds -- Ozone resistance, hot set and mineral oil immersion tests
GB/T 2951.11-2008 — Common test methods for insulating and sheathing materials of electric and optical cables -- Part 11: Methods for general application -- Measurement of thickness and overall dimensions -- Tests for determining the mechanical properties
GB/T 3048.1-2007 — Test methods for electrical properties of electric cables and wires - Part 1: General
YD/T 1667-2025 — Telecommunication cables - Foamed polyolefin dielectric, smooth or knurl copper ��aluminum�� -tube outer conductor�� 50 Ohm radio-frequency coaxial cable for wireless communications
YD/T 2651-2024 — Communication Cable - Polytetrafluoroethylene insulated radio frequency coaxial cable - Solid Insulation Braided Tinned Outer Conductor Type
YD/T 1173-2024 — Flame retardant and fire resistant flexible cable for communication power supply
5 Classification and status
International classification (ICS): 33.120.20
Chinese Standard Classification (CCS): K 13
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 1281-2003
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
Secure payment via Stripe
Payments accepted
YD/T 1281-2003
$295.00