YD/T 1272.3-2015Optical fiber connector - Part 3: Type SC (English PDF)

Foreword

This Standard is prepared referring to the following standards.

1 GB 4943-2001 Security of Information Technical Equipment

2 YD 1268.2-2003 Security Requirement and Test Method of Lithium Battery Charger

for the Mobile Communication Terminal

3 GB 9254 Wireless Interference Limit and Measure Method of Information Technical

Equipment

4 GB 17465.1 Housing and Similar Appliance Coupler Part I. Universal Requirement

5 GB 17625.1 Magnetic Compatibility Limit Emission Limit for Harmonic Current

6 GB 17625.2 Magnetic Compatibility Limit Limit for the Voltage Fluctuation

Generated by the Equipment with the Rated Current Less than 16A in the Low-Voltage

Supply System.

When the charger simultaneously works with the mobile communication terminal, its

magnetic compatibility feature shall respectively meet the magnetic compatibility requirement

of the mobile communication terminal in different modes. Meanwhile, during the preparing

process of this Standard, it also refers to the electric feature and mechanical structure of

"universal serial bus specification (version 2.0)" interface.

With the development of the technology, the related standards will be continually

prepared. After this Standard is issued, we will conduct researches on the technical

requirement and test methods of the equipment such as on-board DC charger and plan to

supplement the corresponding parts as the supplementary documents of this Standard if

necessary.

This Standard is proposed and managed by China Communication Standardization

association.

This Standard is Drafted by. Telecom Research Institute of Ministry of Information and

Industry, and Konka Group Co., Ltd.

Key drafters of this Standard. Liu Jun, Men Meng, Yuan Weijun, Yuan, Zhang Xia, He

Guili, Li Hongtao, and Du Yong.

Introduction

This Standard is prepared to guarantee the security of the product and availability,

meanwhile, it enables the mobile communication terminals with different types to use the

charger having the same specification to reduce the electronic waste, protect the environment,

save resource and reduce the use cost of the mobile communication terminal through the

uniform interface mode and technical requirement.

Considering the requirement for the data exchange between the mobile communication

terminal and peripheral equipment and sharing possibility of the charging cable, this Standard

refers to the A series interface specification of the Universal Serial Bus (USB) to improve the

application efficiency and convenience of the related components.

Considering the individual development of the mobile communication terminal, this

Standard regulates the uniform connection interface and sets it on the charger side, and the

connection interface on the mobile communication terminal side is identified by the design

and manufacturer of the products.

Technical Requirement and Test Method of Charger and Interface

for Mobile Telecommunication Terminal Equipment

1 Scope

This Standard regulates the technical requirements and test methods of charger and

interface of the mobile communication terminal (hereafter called as the "terminal"), including

the physical feature, electric feature, security feature, magnetic compatibility and environment

adaptability of the AC charger and interface.

This Standard is applicable to the interface of the terminal charger, AC charger and

connection cable.

2 Reference documents

The articles in the following documents become the articles of this Standard through the

reference of this reference. For any reference document with the date, its subsequent modified

contents (not including corrected content) or revisal versions are not applicable to this

Standard, however, it is encouraged that all parties reaching this agreement on this Standard

study whether the latest versions of these documents can be used. For any reference files

without the date, its latest version is not applicable to this Standard.

GB 2099.1-1996 Housing and Similar Plug and Socket Part I. Universal Requirement

GB 4943-2001 Security of Information Technical Equipment

GB 5023.5-1997 Insulation Cable Polythene below the Rated Voltage 450/750V Part V.

Software Cable (chord)

GB9254 Wireless Interference Limit and Measure Method of the Information

Technology Equipment

GB 17465.1-1998 Housing and Similar Appliance Coupler Part I Universal Requirement

GB 17625.1 Magnetic compatibility Limit Emission Limit for Harmonic Wave

Current

exceed 35N and the required force for pulling the plug from the socket can not be less than

10N.