YD/T 1244-2002Requirement and measurement methods of electromagnetic compatibility for xDSL equipment (English PDF)
数字用户线(xDSL)设备电磁兼容性要求和测量方法
This is a limited preview
Buy now to download the full PDF (11 pages)
Need quotation for your management?
Get a formal quotation for YD/T 1244-2002 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 10, 2002
Implementation date
December 10, 2002
Scope
YD/T 1244-2002 is the English-translated version of 数字用户线(xDSL)设备电磁兼容性要求和测量方法.
YD/T 1244-2002 is the Chinese standard "Requirement and measurement methods of electromagnetic compatibility for xDSL equipment". This standard specifies the xDSL family of devices electromagnetic compatibility requirements and methods of measurement.
This standard applies to xDSL central office and customer premise equipment, including HDSL, SHDSL, ADSL and VDSL etc. Issued on 2002-12-10, in force from 2002-12-10.
Found what you need?
Document preview — YD/T 1244-2002
National Standard of the People's Republic of China
- Classification
- L06
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Term
- 3 Terms and Definitions
- 3.2 Abbreviations
- 3.3 Specifications
- 3.4 Product model and designation
- 3.5 Product marking
- 4 Product Classification
- 4.1 General
- 4.2 Model and name
- 4.3 Test Waveform
- 4.4 Product labelling
- 5 Requirements
- 5.2 Chemical components
- 5.3 SPD Disconnector Inspection
- 5.4 Environmental protection property
- 5.5 Material compatibility
- 5.6 Spurious emission
- 5.7 Transmit Spectrum Mask
- 5.8 Time of Rising Edge and Falling Edge
- 5.9 In-band Flatness
- 6 Test methods
- 6.2 Term restrictions
- 6.3 End-of-manufacturing inspection
- 6.4 Type inspection
- 6.5 Phone Program
- 6.6 OTASP/OTAPA Function
- 6.7 Processing of PIN
- 6.8 Fixed Dialing Number (FDN)
- 6.9 Abbreviated Dialing Number (ADN)
- 7 Inspection Rules
- 7.1 Packaging
- 7.2 Marking
- 7.3 Transport
- 7.4 Storage
- 7.5 Safety Test for Temporary Overvoltage Failure
- 7.6 Test of Temporary Overvoltage Withstand Characteristic
- 7.7 SPD Thermal Stability Test
- 8 Marking, Packing, Transport and Storage
- 8.1 Voltage Drop Test
- 8.2 Surge Withstand Capability at Load side
- 8.3 Short-circuit Withstand Capability at Load Side
- 9 Environmental Applicability Test
- 9.1 Vibration Test
- 9.2 High Temperature Test
- 9.3 Low Temperature Test
- 9.4 Alternating Humid Heat Test
- 9.5 Performance requirements for radio resource management
1 Foreword
YD/T 1244-2002 was issued by Ministry of Industry and Information Technology on 10 December 2002 and took effect the same day.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 11 pages in English translation.
2 Scope Preview
This standard specifies the xDSL family of devices electromagnetic compatibility requirements and methods of measurement. This standard applies to xDSL central office and customer premise equipment, including HDSL, SHDSL, ADSL and VDSL etc.
YD/T 1244-2002 is filed under Chinese Standard Classification L06, in the field of electronic components and information technology.
This catalogue holds 2,288 other YD/T standards without an ICS number.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 11 pages (approximate)
Chinese original: about 16,111 characters
4 Related standards
Standards on related subjects:
GB 4343.1-2024 — Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
YD/T 983-2013 — Limits and methods of measurement of electromagnetic compatibility of telecommunicatin power supply equipment
GB/T 4365-2003 — Electrotechnical terminology -- Electromagnetic compatibility
YD/T 6589-2025 — Requirements and measurement methods of electromagnetic Compatibility for radio optical communication equipment based on LED and infrared technology
YD/T 6549-2025 — Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (O Hz to 300 GHz)
YD/T 1312.1-2025 — Requirements and measurement methods of electromagnetic compatibility for radio communication equipment - Part 1: Common technical requirements
5 Classification and status
Chinese Standard Classification (CCS): L 06
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 11 pages — is available in the English PDF.
How to Download YD/T 1244-2002
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
Secure payment via Stripe
Payments accepted
YD/T 1244-2002
$175.00