Valid

YD/T 1222.1-2002800MHz CDMA digital cellular mobile communication network message center equipment test method Part one: point to point SMS (English PDF)

800MHz CDMA数字蜂窝移动通信网短消息中心设备测试方法第一分册点对点短消息业务部分

Preview PDF

This is a limited preview

Buy now to download the full PDF (66 pages)

Need quotation for your management?

Get a formal quotation for YD/T 1222.1-2002 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

July 22, 2002

Implementation date

July 22, 2002

Scope

YD/T 1222.1-2002 is the English-translated version of 800MHz CDMA数字蜂窝移动通信网短消息中心设备测试方法第一分册点对点短消息业务部分.

YD/T 1222.1-2002 is the Chinese standard "800MHz CDMA digital cellular mobile communication network message center equipment test method Part one: point to point SMS".

This standard specifies the 800MHz CDMA digital cellular mobile communication network to the point of a short message service center system support, functionality, performance/stability, security, operation and maintenance, interface signaling, business application interfaces and artificial Taiwan/Taiwan, and other aspects of the test automatically methods.

This standard applies to 800MHz CDMA digital cellular mobile communication network to the point of short messaging device. Issued on 2002-07-22, in force from 2002-07-22.

Found what you need?

Document preview — YD/T 1222.1-2002

National Standard of the People's Republic of China

Classification: M37

[Preview only]
1 Scope
2 Normative References
2.1 Term
3 Terms and Definitions
3.2 Abbreviations
3.3 Specifications
3.4 Product model and designation
3.5 Product marking
4 Product Classification
4.1 General
4.2 Model and name
4.3 Test Waveform
4.4 Product labelling
5 Requirements
5.2 Chemical components
5.3 SPD Disconnector Inspection
5.4 Environmental protection property
5.5 Material compatibility
5.6 Spurious emission
5.7 Transmit Spectrum Mask
5.8 Time of Rising Edge and Falling Edge
5.9 In-band Flatness
6 Test methods
6.2 Term restrictions
6.3 End-of-manufacturing inspection
6.4 Type inspection
6.5 Phone Program
6.6 OTASP/OTAPA Function
6.7 Processing of PIN
6.8 Fixed Dialing Number (FDN)
6.9 Abbreviated Dialing Number (ADN)
7 Inspection Rules
7.1 Packaging
7.2 Marking
7.3 Transport
7.4 Storage
7.5 Safety Test for Temporary Overvoltage Failure
7.6 Test of Temporary Overvoltage Withstand Characteristic
7.7 SPD Thermal Stability Test
8 Marking, Packing, Transport and Storage
8.1 Voltage Drop Test
8.2 Surge Withstand Capability at Load side
8.3 Short-circuit Withstand Capability at Load Side
9 Environmental Applicability Test
9.1 Vibration Test
9.2 High Temperature Test
9.3 Low Temperature Test
9.4 Alternating Humid Heat Test
9.5 Performance requirements for radio resource management

1 Foreword

YD/T 1222.1-2002 was issued by Ministry of Industry and Information Technology on 22 July 2002 and took effect the same day.

The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 66 pages in English translation.

2 Scope Preview

YD/T 1222.1-2002 is filed under Chinese Standard Classification M37, in the field of telecommunications and broadcasting.

This catalogue holds 2,288 other YD/T standards without an ICS number.

In this catalogue, YD/T standards carry edition years from 1982 to 2026.

3 About this standard

Sector: Telecommunication Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 66 pages (approximate)

Chinese original: about 98,952 characters

4 Related standards

Standards on related subjects:

YD/T 1214-2006 — Technical requirement of 900/1800MHz TDMA Digital Cellular Mobile Telecommunication Network General Packet Radio Service(GPRS) - Equipment: Mobile Stations

YD 1268.1-2003 — [YD/T 1268.1-2003] The safety specification and test method for lithium batteries

YD/T 6502-2025 — Calibration procedures of electromagnetic field sensors and probes (excluding antennas)from 9kHz to 40GHz

YD/T 6501.1-2025 — Antenna performance requirement and measurement method for civil robots integrated with wireless communication technology - Part 1: General requirement

YD/T 2869.3-2025 — Performance requirement and measurement method for MIMO antenna terminal Part 3: 5G NR wireless terminal (mmWave)

5 Classification and status

Chinese Standard Classification (CCS): M 37

Prefix YD/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 66 pages — is available in the English PDF.

How to Download YD/T 1222.1-2002

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.