YD/T 1193.4-2002Bearer independent call control specification. Part 4: Application transport Mechanism(APM), tunnelling and IP bearer control protocol of BICC (English PDF)
与承载无关的呼叫控制(BICC)规范??第4部分:BICC的应用传送机制(APM)、隧道和IP承载控制协议
This is a limited preview
Buy now to download the full PDF (23 pages)
Need quotation for your management?
Get a formal quotation for YD/T 1193.4-2002 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
June 21, 2002
Implementation date
June 21, 2002
Scope
YD/T 1193.4-2002 is the English-translated version of 与承载无关的呼叫控制(BICC)规范??第4部分:BICC的应用传送机制(APM)、隧道和IP承载控制协议.
YD/T 1193.4-2002 is the Chinese standard "Bearer independent call control specification. Part 4: Application transport Mechanism(APM), tunnelling and IP bearer control protocol of BICC".
This standard specifies the Bearer Independent Call Control applied network functional model and protocol model, and support capabilities. This standard applies to the bearer independent call control network equipment research and development. Issued on 2002-06-21, in force from 2002-06-21.
Found what you need?
Document preview — YD/T 1193.4-2002
National Standard of the People's Republic of China
- Classification
- M20
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Term
- 3 Terms and Definitions
- 3.2 Abbreviations
- 3.3 Specifications
- 3.4 Product model and designation
- 3.5 Product marking
- 4 Product Classification
- 4.1 General
- 4.2 Model and name
- 4.3 Test Waveform
- 4.4 Product labelling
- 5 Requirements
- 5.2 Chemical components
- 5.3 SPD Disconnector Inspection
- 5.4 Environmental protection property
- 5.5 Material compatibility
- 5.6 Spurious emission
- 5.7 Transmit Spectrum Mask
- 5.8 Time of Rising Edge and Falling Edge
- 5.9 In-band Flatness
- 6 Test methods
- 6.2 Term restrictions
- 6.3 End-of-manufacturing inspection
- 6.4 Type inspection
- 6.5 Phone Program
- 6.6 OTASP/OTAPA Function
- 6.7 Processing of PIN
- 6.8 Fixed Dialing Number (FDN)
- 6.9 Abbreviated Dialing Number (ADN)
- 7 Inspection Rules
- 7.1 Packaging
- 7.2 Marking
- 7.3 Transport
- 7.4 Storage
- 7.5 Safety Test for Temporary Overvoltage Failure
- 7.6 Test of Temporary Overvoltage Withstand Characteristic
- 7.7 SPD Thermal Stability Test
- 8 Marking, Packing, Transport and Storage
- 8.1 Voltage Drop Test
- 8.2 Surge Withstand Capability at Load side
- 8.3 Short-circuit Withstand Capability at Load Side
- 9 Environmental Applicability Test
- 9.1 Vibration Test
- 9.2 High Temperature Test
- 9.3 Low Temperature Test
- 9.4 Alternating Humid Heat Test
- 9.5 Performance requirements for radio resource management
1 Foreword
YD/T 1193.4-2002 was issued by Ministry of Industry and Information Technology on 21 June 2002 and took effect the same day.
It is one of 4 parts of the YD/T 1193 series.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard specifies the Bearer Independent Call Control applied network functional model and protocol model, and support capabilities. This standard applies to the bearer independent call control network equipment research and development.
YD/T 1193.4-2002 is filed under Chinese Standard Classification M20, in the field of telecommunications and broadcasting.
This catalogue holds 2,288 other YD/T standards without an ICS number.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 23 pages (approximate)
Chinese original: about 34,377 characters
4 Related standards
Other parts of this standard:
YD/T 1193.1-2002 — Part 1: functional of BICC
YD/T 1193.2-2002 — Part 2: general function and format of messages and parameters for Bicc
YD/T 1193.3-2002 — Part 3: procedure of BICC
Standards on related subjects:
YD/T 3909-2021 — Vehicle emergency call system based on public telecommunication network - Requirements and architecture
YD/T 1761-2012 — Technical requirements for web accessibility
5 Classification and status
Chinese Standard Classification (CCS): M 20
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 23 pages — is available in the English PDF.
How to Download YD/T 1193.4-2002
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1193.3-2002 — Bearer independent call control specification. Part 3: procedure of BICC
YD/T 1193.2-2002 — Bearer independent call control specification. Part 2: general function and format of messages and parameters for Bicc
YD/T 1193.1-2002 — Bearer independent call control specification. Part 1: functional of BICC
Secure payment via Stripe
Payments accepted
YD/T 1193.4-2002
$475.00