YD/T 1180-2002No.7 signalling Network Management Interface Technical Specification. MTP and SCCP Part (English PDF)
NO.7信令网网络管理接口技术规范——MTP和SCCP部分
This is a limited preview
Buy now to download the full PDF (89 pages)
Need quotation for your management?
Get a formal quotation for YD/T 1180-2002 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
February 1, 2002
Implementation date
February 1, 2002
Scope
YD/T 1180-2002 is the English-translated version of NO.7信令网网络管理接口技术规范——MTP和SCCP部分.
YD/T 1180-2002 is the Chinese standard "No.7 signalling Network Management Interface Technical Specification. MTP and SCCP Part". This standard specifies the No. 7 signaling network management interface portion of the MTP and SCCP management function requirements and CMIP -based information model.
This standard applies to the use of Q3 interface No. 7 signaling network management. Issued on 2002-02-01, in force from 2002-02-01.
Found what you need?
Document preview — YD/T 1180-2002
National Standard of the People's Republic of China
- Classification
- L79
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Term
- 3 Terms and Definitions
- 3.2 Abbreviations
- 3.3 Specifications
- 3.4 Product model and designation
- 3.5 Product marking
- 4 Product Classification
- 4.1 General
- 4.2 Model and name
- 4.3 Test Waveform
- 4.4 Product labelling
- 5 Requirements
- 5.2 Chemical components
- 5.3 SPD Disconnector Inspection
- 5.4 Environmental protection property
- 5.5 Material compatibility
- 5.6 Spurious emission
- 5.7 Transmit Spectrum Mask
- 5.8 Time of Rising Edge and Falling Edge
- 5.9 In-band Flatness
- 6 Test methods
- 6.2 Term restrictions
- 6.3 End-of-manufacturing inspection
- 6.4 Type inspection
- 6.5 Phone Program
- 6.6 OTASP/OTAPA Function
- 6.7 Processing of PIN
- 6.8 Fixed Dialing Number (FDN)
- 6.9 Abbreviated Dialing Number (ADN)
- 7 Inspection Rules
- 7.1 Packaging
- 7.2 Marking
- 7.3 Transport
- 7.4 Storage
- 7.5 Safety Test for Temporary Overvoltage Failure
- 7.6 Test of Temporary Overvoltage Withstand Characteristic
- 7.7 SPD Thermal Stability Test
- 8 Marking, Packing, Transport and Storage
- 8.1 Voltage Drop Test
- 8.2 Surge Withstand Capability at Load side
- 8.3 Short-circuit Withstand Capability at Load Side
- 9 Environmental Applicability Test
- 9.1 Vibration Test
- 9.2 High Temperature Test
- 9.3 Low Temperature Test
- 9.4 Alternating Humid Heat Test
- 9.5 Performance requirements for radio resource management
1 Foreword
YD/T 1180-2002 was issued by Ministry of Industry and Information Technology on 1 February 2002 and took effect the same day.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 89 pages in English translation.
2 Scope Preview
This standard specifies the No. 7 signaling network management interface portion of the MTP and SCCP management function requirements and CMIP -based information model. This standard applies to the use of Q3 interface No. 7 signaling network management.
YD/T 1180-2002 is filed under Chinese Standard Classification L79, in the field of electronic components and information technology.
This catalogue holds 2,288 other YD/T standards without an ICS number.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 89 pages (approximate)
Chinese original: about 134,189 characters
4 Related standards
Standards on related subjects:
GB/T 17969.1-2015 — Information technology -- Open systems interconnection -- Procedures for the operation of OSI registration authorities -- Part 1: General procedures and top arcs of the International Object Identifier tree
GB/T 17143.7-1997 — Information technology. Open Systems Interconnection. Systems Management. Part 7: Security alarm reporting function
GB/T 17143.4-1997 — Information technology. Open Systems Interconnection. Systems Management. Part 4: Alarm reporting function
YD/T 6116.2-2025 — Computing Power Interoperability Requirements - Part 2: Computing Power Scheduling
YD/T 1190-2024 — A network-based virtual IP private network (IP-VPN) framework
YD/T 1177-2024 — IP multicast system architecture and basic protocols
5 Classification and status
Chinese Standard Classification (CCS): L 79
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 89 pages — is available in the English PDF.
How to Download YD/T 1180-2002
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
Secure payment via Stripe
Payments accepted
YD/T 1180-2002
$1,400.00