YD 5103-2003Technical Specification for Construction and Acceptance of Telecommunication Conduit Engineering (English PDF)
通信道路工程施工及验收技术规范
This is a limited preview
Buy now to download the full PDF (42 pages)
Need quotation for your management?
Get a formal quotation for YD 5103-2003 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Mandatory
Issue date
September 13, 2003
Implementation date
November 1, 2003
Scope
YD 5103-2003 is the English-translated version of 通信道路工程施工及验收技术规范.
YD 5103-2003 is the Chinese standard "Technical Specification for Construction and Acceptance of Telecommunication Conduit Engineering".
This standard applies to the construction of new communication pipeline construction quality inspection, with the inspection and completion of the work of the technical basis for acceptance, and applies to the reconstruction of the communication pipeline, expansion project.
Where the standard is not listed in the unconventional building standards (specifications), according to the engineering design drawings or the relevant provisions.
The equipment used in the construction of communication pipelines shall comply with the relevant requirements of this standard and engineering design. Issued on 2003-09-13, in force from 2003-11-01.
Found what you need?
Document preview — YD 5103-2003
National Standard of the People's Republic of China
- Classification
- P76
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 3 Terms and Definitions
- 4 Overview
- 4.1 General requirements
- 5 Technical Requirements
- 6 Calibration conditions
- 6.1 Environmental conditions
- 6.2 Measurement standards and other equipment
- 7 Calibration items and calibration methods
- 7.1 Calibration Items
- 7.2 Calibration method
- 8 Expression of calibration results
- 9 Recalibration interval
1 Foreword
YD 5103-2003 was issued by Ministry of Industry and Information Technology on 13 September 2003 and has been in force since 1 November 2003.
The YD prefix, without a suffix, marks a mandatory standard: within its scope, compliance is required.
The document runs to 42 pages in English translation.
2 Scope Preview
This standard applies to the construction of new communication pipeline construction quality inspection, with the inspection and completion of the work of the technical basis for acceptance, and applies to the reconstruction of the communication pipeline, expansion project. Where the standard is not listed in the unconventional building standards (specifications), according to the engineering design drawings or the relevant provisions. The equipment used in the construction of communication pipelines shall comply with the relevant requirements of this standard and engineering design.
YD 5103-2003 is filed under Chinese Standard Classification P76, in the field of engineering construction.
This catalogue holds 67 other YD standards without an ICS number.
In this catalogue, YD standards carry edition years from 1987 to 2015.
3 About this standard
Sector: Telecommunication Industry Standard
Issued by: Ministry of Industry and Information Technology
English translation: about 42 pages (approximate)
Chinese original: about 62,687 characters
4 Related standards
Standards on related subjects:
GB 30485-2013 — Standard for pollution control on co-processing of solid wastes in cement kiln
GB 50949-2013 — Construction code for sound reinforcement system
GB 50313-2013 — Code for design of fire communication and command system
YD/T 5102-2024 — Technical Specifications for Communication Line Engineering
YD/T 5094-2019 — Signaling Network Engineering Technical Specifications
YD/T 5113-2018 — Design Specifications for Network Management System of WDM Optical Fiber Transmission System Engineering
5 Classification and status
Chinese Standard Classification (CCS): P 76
Prefix YD: mandatory standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 42 pages — is available in the English PDF.
How to Download YD 5103-2003
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD 5084.3-2015 — Specification for Seismic Test of Switching Equipment. Part 3: Mobile Communication Core Network Equipment
YD 5091.1-2015 — Specification for Seismic Test of Transmission Equipment. Part 1: Optical Transmission Equipment
YD 5133-2015 — Supervision Specifications for Mobile Communication Steel Tower and Mast Engineering
Secure payment via Stripe
Payments accepted
YD 5103-2003
$800.00