Valid

YC/T 159-2019Tobacco and tobacco products - Determination of water soluble sugars - Continuous flow method (English PDF)

Preview PDF

Also coversYCT159-2019

This is a limited preview

Buy now to download the full PDF (9 pages)

Need quotation for your management?

Get a formal quotation for YC/T 159-2019 in 30 minutes.

Issued by

State Tobacco Monopoly Bureau

Level / Type

National · Recommended

Issue date

August 2, 2011

Implementation date

September 1, 2011

Scope

YC/T 159-2019 (Tobacco and tobacco products - Determination of water soluble sugars - Continuous flow method) is available as an English-translated PDF.

YC/T 159-2019 — This Part of YC/T 405 specifies the high performance liquid chromatography method for the determination of maleic hydrazide residue in tobacco and tobacco products.

This Part applies to the determination of maleic hydrazide pesticide residues in tobacco and tobacco products. As for this method, the detection limit is 0.66mg/kg AND the quantitative limit is 2.18mg/kg.

Found what you need?

Document preview — YC/T 159-2019

National Standard of the People's Republic of China

ICS
65.160
Classification
X 87

Issued by: State Tobacco Monopoly Bureau

Contents

  • Foreword...3
  • 1 Scope...4
  • 2 Normative references...4
  • 3 Principle...4
  • 4 Reagents and materials...4
  • 5 Instruments and apparatuses...5
  • 6 Sample preparation...6
  • 7 Operation steps...6
  • 8 Result expression...7
  • 9 Recovery...8
  • 10 Test report...8
  • Appendix A (Informative) Chromatogram example...9

Foreword

YC/T 405 "Tobacco and tobacco products – Determination of multi-pesticide

residues" is divided into five parts.

- Part 1. High performance liquid chromatography - tandem mass

spectrometry method;

- Part 2. Determination of organochlorine and pyrethroids pesticide – Gas

chromatographic method;

- Part 3. Gas chromatography - Mass spectrometry method and gas

chromatographic methods;

- Part 4. Determination of dithiocarbamate pesticide residues – Gas

chromatography-mass spectrometry method;

- Part 5. Determination of maleic hydrazide residue – High performance liquid

chromatography method.

This is Part 5 of YC/T 405.

This Part was drafted in accordance with the rules specified in GB/T 1.1-2009

AND GB/T 20001.4-2001.

Please note that some contents of this document may involve patents. The

issuing authority of this document does not undertake any responsibility of

identifying these patents.

This Part was proposed by the State Tobacco Monopoly Bureau.

This Part shall be under the jurisdiction of the National Tobacco Standardization

Technical Committee - Cigarette Institute Branch (SAC/TC 144/SC 1).

This drafting organizations of this Part. China National Tobacco Corporation -

Zhengzhou Tobacco Research Institute, National Tobacco Quality Supervision

and Inspection Center, China Tobacco Standardization Research Center,

Hongta Tobacco (Group) Co., Ltd., China Tobacco Hubei Industry Corporation.

1 Scope

This Part of YC/T 405 specifies the high performance liquid chromatography

method for the determination of maleic hydrazide residue in tobacco and

tobacco products.

This Part applies to the determination of maleic hydrazide pesticide residues in

tobacco and tobacco products. As for this method, the detection limit is

0.66mg/kg AND the quantitative limit is 2.18mg/kg.

2 Normative references

The following documents are essential to the application of this document. For

the dated documents, only the versions with the dates indicated are applicable

to this document; for the undated documents, only the latest version (including

all the amendments) are applicable to this standard.

GB/T 6682 Water for analytical laboratory use – Specification and test

methods

YC/T 31 Tobacco and tobacco products – Preparation of test sample and

determination of water content – Oven method

3 Principle

The crushed sample in the hydrochloric acid solution is heated for reflux and

extraction, then the extract is purified in C18 SPE column AND eluted by sodium

hydroxide solution, AND the elution is detected by the liquid chromatographic

UV detector.

4 Reagents and materials

5.2 Electric heating mantle.

5.3 Precision pH meter.

5.4 Spherical condenser pipe.

5.5 Analytical balance, sensitivity is 0.0001g.

5.6 0.45µm aqueous filter membrane.

5.7 High performance liquid chromatography with UV detector.

6 Sample preparation

In accordance with YC/T 31, PREPARE sample and MEASURE the sample's

moisture content.

7 Operation steps

7.1 Extraction

WEIGH about 5g of samples, accurate to 0.01g; PLACE it into a 250mL grinding

mouth round bottom flask; ADD 50mL of hydrochloric acid solution (4.5).

PLACE the round flask in an electric heating mantle (5.2); INSTALL a spherical

condenser pipe (5.4); HEAT it for reflux. CONTROL the reflux speed to make

the steam reach to the second ball of the condenser pipe; continuously HEAT

for reflux for 1h. After completion of reflux, LET it cool down to room temperature;

USE qualitative filter paper to filter sample; COLLECT the filtrate into a 100mL

volumetric flask; USE appropriate amount of hydrochloric acid solution (4.5) to

rinse the condenser pipe and the extracted sample; FITER the filtrate and

COMBINE it into this 100mL volumetric flask; USE hydrochloric acid solution

(4.5) to make the volume reach to the mark.

7.2 C18 column pretreatment

TAKE 2mL of methanol (4.4) and 2mL of 0.1mol/L sodium hydroxide solution

(4.6) to consecutively pre-rinse the C18 solid phase extraction column (5.1).

7.3 Purification

From the 100mL volumetric flask, accurately PIPETTE 2mL of extract (7.1) onto

the C18 solid phase extraction column (5.1); immediately COLLECT the effluent

component into a 5mL volumetric flask (4.6); USE 2mL of 0.1mol/L sodium

hydroxide solution to elute it; COMBINE the eluent into this 5mL volumetric flask;

USE sodium hydroxide solution (4.6) to make the volume reach to the mark;

......

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.

Referenced standards

How to Download YC/T 159-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
9 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YC/T 159-2019

$125.00