YB/T 6421-2025Cold-rolled bottom-layer-free grain-oriented electrical steel strip (sheet) for electric vehicle driving motor (English PDF)
电动汽车驱动电机用冷轧无底层取向电工钢带(片)
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YB/T 6421-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 17, 2025
Implementation date
July 1, 2026
Scope
YB/T 6421-2025 is the English-translated version of 电动汽车驱动电机用冷轧无底层取向电工钢带(片).
YB/T 6421-2025 is the Chinese standard "Cold-rolled bottom-layer-free grain-oriented electrical steel strip (sheet) for electric vehicle driving motor".
This standard specifies the symbols and grades, ordering contents, general requirements, technical requirements, inspection and testing, re-inspection and judgment rules, packaging, marking, and quality certificates for cold-rolled non-oriented electrical steel strips (sheets) for electric vehicle drive motors.
This standard applies to cold-rolled magnesium-silicate-free oriented electrical steel strips (sheets) with nominal thicknesses of 0.20mm, 0.23mm, and 0.27mm for manufacturing stators of electric vehicle drive motors.
Cold-rolled magnesium-silicate-free undercoat steel strips (sheets) for other applications can also be used as a reference. It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-07-01.
Found what you need?
Document preview — YB/T 6421-2025
National Standard of the People's Republic of China
- ICS
- 77.140.50
- Classification
- H46
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 3 Terms and Definitions
- 4 Order information
- 5 Test method
- 6 Technical requirements
- 7 Test methods
- 8 Inspection rules
1 Foreword
YB/T 6421-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 July 2026.
The YB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the symbols and grades, ordering contents, general requirements, technical requirements, inspection and testing, re-inspection and judgment rules, packaging, marking, and quality certificates for cold-rolled non-oriented electrical steel strips (sheets) for electric vehicle drive motors. This standard applies to cold-rolled magnesium-silicate-free oriented electrical steel strips (sheets) with nominal thicknesses of 0.20mm, 0.23mm, and 0.27mm for manufacturing stators of electric vehicle drive motors. Cold-rolled magnesium-silicate-free undercoat steel strips (sheets) for other applications can also be used as a reference.
YB/T 6421-2025 falls under ICS 77.140.50, in the field of metallurgy.
This catalogue holds 971 other YB/T standards in that field.
In this catalogue, YB/T standards carry edition years from 1980 to 2026.
3 About this standard
Sector: Ferrous Metallurgy Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
GB/T 5313-2023 — Steel plate with through-thickness properties
GB/T 6653-2017 — Steel plates and strips for welded gas cylinders
YB/T 5063-2007 — Heat Treatment Spring Steel Strips
YB/T 6422-2025 — Continuously hot-dip zinc-aluminum-magnesium alloy coated steel sheet and strip for photovoltaic stents
YB/T 6420-2025 — Atmospheric corrosion resisting steel plate for urban monorail transit system
YB/T 6419-2025 — High strength low alloy cold rolled steel sheet and strip
5 Classification and status
International classification (ICS): 77.140.50
Chinese Standard Classification (CCS): H 46
Prefix YB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YB/T 6421-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YB/T 036.1-2026 — General technical requirement for metallurgical equipment manufacturing - Part 1: Inspection and trst
YB/T 036.11-2026 — General technical requirements for metallurgical equipment manufacturing - Part 11: welding
YB/T 036.21-2026 — General technical requirement for metallurgical equipment manufacturing - Part 21: Packaging
YB/T 6421-2025
$210.00