YB/T 6419-2025High strength low alloy cold rolled steel sheet and strip (English PDF)
低合金高强度冷轧钢板及钢带
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YB/T 6419-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 17, 2025
Implementation date
July 1, 2026
Scope
YB/T 6419-2025 is the English-translated version of 低合金高强度冷轧钢板及钢带.
YB/T 6419-2025 is the Chinese standard "High strength low alloy cold rolled steel sheet and strip".
This standard specifies the classification and designation, ordering details, manufacturing process, technical requirements, test methods, inspection rules, packaging, marking, and quality certificate for low-alloy high-strength cold-rolled steel sheets and strips.
This standard applies to low-alloy high-strength cold-rolled wide steel strips and sheared steel sheets and strips with a thickness not exceeding 4.0 mm, used in trailer guardrails, industrial chains, and welded pipes.
It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-07-01.
Found what you need?
Document preview — YB/T 6419-2025
National Standard of the People's Republic of China
- ICS
- 77.140.50
- Classification
- H46
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 3 Terms and Definitions
- 4 Order information
- 5 Test method
- 6 Technical requirements
- 7 Test methods
- 8 Inspection rules
1 Foreword
YB/T 6419-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 July 2026.
The YB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the classification and designation, ordering details, manufacturing process, technical requirements, test methods, inspection rules, packaging, marking, and quality certificate for low-alloy high-strength cold-rolled steel sheets and strips. This standard applies to low-alloy high-strength cold-rolled wide steel strips and sheared steel sheets and strips with a thickness not exceeding 4.0 mm, used in trailer guardrails, industrial chains, and welded pipes.
YB/T 6419-2025 falls under ICS 77.140.50, in the field of metallurgy.
This catalogue holds 971 other YB/T standards in that field.
In this catalogue, YB/T standards carry edition years from 1980 to 2026.
3 About this standard
Sector: Ferrous Metallurgy Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
GB/T 5313-2023 — Steel plate with through-thickness properties
GB/T 6653-2017 — Steel plates and strips for welded gas cylinders
YB/T 5063-2007 — Heat Treatment Spring Steel Strips
YB/T 6422-2025 — Continuously hot-dip zinc-aluminum-magnesium alloy coated steel sheet and strip for photovoltaic stents
YB/T 6421-2025 — Cold-rolled bottom-layer-free grain-oriented electrical steel strip (sheet) for electric vehicle driving motor
YB/T 6420-2025 — Atmospheric corrosion resisting steel plate for urban monorail transit system
5 Classification and status
International classification (ICS): 77.140.50
Chinese Standard Classification (CCS): H 46
Prefix YB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YB/T 6419-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YB/T 036.1-2026 — General technical requirement for metallurgical equipment manufacturing - Part 1: Inspection and trst
YB/T 036.11-2026 — General technical requirements for metallurgical equipment manufacturing - Part 11: welding
YB/T 036.21-2026 — General technical requirement for metallurgical equipment manufacturing - Part 21: Packaging
YB/T 6419-2025
$120.00