YB/T 6416-2025Method for determination of kilogram scale iron reduction softening-melting dropping performance under load and quenching experiment of primary slag (English PDF)
铁矿石公斤级高温荷重还原软熔滴落性能及初渣激冷试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YB/T 6416-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 17, 2025
Implementation date
July 1, 2026
Scope
YB/T 6416-2025 is the English-translated version of 铁矿石公斤级高温荷重还原软熔滴落性能及初渣激冷试验方法.
YB/T 6416-2025 is the Chinese standard "Method for determination of kilogram scale iron reduction softening-melting dropping performance under load and quenching experiment of primary slag".
This standard specifies the test instruments, equipment, conditions, sample preparation, test procedures, result calculation, and test report for the high-temperature load reduction softening dripping performance of iron ore at the kilogram level and the initial slag quenching test method.
This standard applies to the evaluation of the high-temperature load reduction softening dripping performance of iron-bearing furnace burdens, including sinter, pellets, natural lump ore, and their composite burdens, and the initial slag (preparation) quenching test.
It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-07-01.
Found what you need?
Document preview — YB/T 6416-2025
National Standard of the People's Republic of China
- ICS
- 73.060.10
- Classification
- D31
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 3 Terms and Definitions
- 4 Order information
- 5 Order contents
- 6 Technical requirements
- 7 Test methods
- 8 Inspection rules
1 Foreword
YB/T 6416-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 July 2026.
The YB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the test instruments, equipment, conditions, sample preparation, test procedures, result calculation, and test report for the high-temperature load reduction softening dripping performance of iron ore at the kilogram level and the initial slag quenching test method. This standard applies to the evaluation of the high-temperature load reduction softening dripping performance of iron-bearing furnace burdens, including sinter, pellets, natural lump ore, and their composite burdens, and the initial slag (preparation) quenching test.
YB/T 6416-2025 falls under ICS 73.060.10, in the field of mining and minerals.
This catalogue holds 109 other YB/T standards in that field.
In this catalogue, YB/T standards carry edition years from 1980 to 2026.
3 About this standard
Sector: Ferrous Metallurgy Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
GB/T 6730.1-2016 — Iron ores -- Preparation of pre-dried test samples for chemical analysis
GB/T 6730.10-2014 — Iron ores -- Determination of silicon content -- Gravimetric methods
GB/T 6730.11-2007 — Iron ores -- Determination of aluminium content -- EDTA titrimetric method
YB/T 6460-2026 — Iron ores - Determination of silicon, calcium, aluminum, magnesium, titanium, manganese, vanadium, phosphorus, potassium, sodium, zinc, copper, arsenic, lead and sulfur content - Wavelength dispersive X-ray fluorescence spectrometry (pressed disc method)
YB/T 6387-2025 — Evaluation Requirements for Green Plants in Iron Ore Mining and Beneficiation
YB/T 6415-2025 — Classification of maceral for blast furnace off-gas dust
5 Classification and status
International classification (ICS): 73.060.10
Chinese Standard Classification (CCS): D 31
Prefix YB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YB/T 6416-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YB/T 036.1-2026 — General technical requirement for metallurgical equipment manufacturing - Part 1: Inspection and trst
YB/T 036.11-2026 — General technical requirements for metallurgical equipment manufacturing - Part 11: welding
YB/T 036.21-2026 — General technical requirement for metallurgical equipment manufacturing - Part 21: Packaging
YB/T 6416-2025
$210.00