YB/T 6410-2025Wire rod of high carbon steel for diamond core steel wire (English PDF)
金刚线母线用高碳钢盘条
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YB/T 6410-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 17, 2025
Implementation date
July 1, 2026
Scope
YB/T 6410-2025 is the English-translated version of 金刚线母线用高碳钢盘条.
YB/T 6410-2025 is the Chinese standard "Wire rod of high carbon steel for diamond core steel wire".
This standard specifies the grade designation, ordering details, manufacturing process, technical requirements, test methods, inspection rules, packaging, marking, and quality certificate for high-carbon steel wire rods used in diamond wire rod manufacturing.
This standard applies to wire rods with a nominal diameter of 5.0 mm to 5.5 mm used in the manufacture of diamond wire rods. It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-07-01.
Found what you need?
Document preview — YB/T 6410-2025
National Standard of the People's Republic of China
- ICS
- 77.140.60
- Classification
- H44
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 3 Terms and Definitions
- 4 Order information
- 5 Test method
- 6 Technical requirements
- 7 Test methods
- 8 Inspection rules
1 Foreword
YB/T 6410-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 July 2026.
The YB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the grade designation, ordering details, manufacturing process, technical requirements, test methods, inspection rules, packaging, marking, and quality certificate for high-carbon steel wire rods used in diamond wire rod manufacturing. This standard applies to wire rods with a nominal diameter of 5.0 mm to 5.5 mm used in the manufacture of diamond wire rods.
YB/T 6410-2025 falls under ICS 77.140.60, in the field of metallurgy.
This catalogue holds 971 other YB/T standards in that field.
In this catalogue, YB/T standards carry edition years from 1980 to 2026.
3 About this standard
Sector: Ferrous Metallurgy Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
GB/T 6723-2017 — Cold forming open section steel for general structure
GB/T 6478-2015 — Steels for cold heading and cold extruding
YB/T 5346-2006 — Cold drawn special shaped steel bar
YB/T 6413-2025 — Hot rolled wire rod for prestressed spiral ribbed steel wire
YB/T 6412-2025 — Hot-rolled wire rod for mooring wire rope in marine engineering
YB/T 6411-2025 — Ultra-low carbon steel hot-rolled wire rods for cable
5 Classification and status
International classification (ICS): 77.140.60
Chinese Standard Classification (CCS): H 44
Prefix YB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YB/T 6410-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YB/T 036.1-2026 — General technical requirement for metallurgical equipment manufacturing - Part 1: Inspection and trst
YB/T 036.11-2026 — General technical requirements for metallurgical equipment manufacturing - Part 11: welding
YB/T 036.21-2026 — General technical requirement for metallurgical equipment manufacturing - Part 21: Packaging
YB/T 6410-2025
$150.00