YB/T 6399-2025Superalloy for fasteners (English PDF)
紧固件用高温合金
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YB/T 6399-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 17, 2025
Implementation date
July 1, 2026
Scope
YB/T 6399-2025 is the English-translated version of 紧固件用高温合金.
YB/T 6399-2025 is the Chinese standard "Superalloy for fasteners". This standard specifies the classification, designations, ordering details, manufacturing methods, technical requirements, testing methods, inspection rules, packaging, marking, and quality certificates for high-temperature alloy wires, wire rods, and bars used in fasteners.
This standard applies to the manufacture of high-temperature alloy round wires with a nominal diameter not exceeding 8mm, high-temperature alloy round, square, and hexagonal wire rods with nominal dimensions (diameter, side length, or distance between opposite sides) of 6mm to 30mm, and high-temperature alloy round bars with a nominal diameter of 8mm to 45mm, high-temperature alloy square bars with a nominal side length of 8mm to 30mm, and high-temperature alloy hexagonal bars with a nominal distance between opposite sides of 8mm to 36mm.
It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-07-01.
Found what you need?
Document preview — YB/T 6399-2025
National Standard of the People's Republic of China
- ICS
- 77.140.75
- Classification
- H43
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 3 Terms and Definitions
- 4 Order information
- 5 Test method
- 6 Technical requirements
- 7 Test methods
- 8 Inspection rules
1 Foreword
YB/T 6399-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 July 2026.
The YB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the classification, designations, ordering details, manufacturing methods, technical requirements, testing methods, inspection rules, packaging, marking, and quality certificates for high-temperature alloy wires, wire rods, and bars used in fasteners. This standard applies to the manufacture of high-temperature alloy round wires with a nominal diameter not exceeding 8mm, high-temperature alloy round, square, and hexagonal wire rods with nominal dimensions (diameter, side length, or distance between opposite sides) of 6mm to 30mm, and high-temperature alloy round bars with a nominal diameter of 8mm to 45mm, high-temperature alloy square bars with a nominal side length of 8mm to 30mm, and high-temperature alloy hexagonal bars with a nominal distance between opposite sides of 8mm to 36mm.
YB/T 6399-2025 falls under ICS 77.140.75, in the field of metallurgy.
This catalogue holds 971 other YB/T standards in that field.
In this catalogue, YB/T standards carry edition years from 1980 to 2026.
3 About this standard
Sector: Ferrous Metallurgy Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
GB/T 29913-2025 — Medium carbon alloy bearing steel
GB/T 5068-2019 — Axles steel for railway locomotives and wagons
YB/T 5222-2014 — Quality hot rolled and forged carbon structural steel round tube blank
YB/T 4422-2026 — Steel flat for fork
YB/T 4421-2026 — Continuously cast round billet for wind power flange
YB/T 4163-2026 — Hot-rolled steel angles for tower structure
5 Classification and status
International classification (ICS): 77.140.75
Chinese Standard Classification (CCS): H 43
Prefix YB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YB/T 6399-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YB/T 036.1-2026 — General technical requirement for metallurgical equipment manufacturing - Part 1: Inspection and trst
YB/T 036.11-2026 — General technical requirements for metallurgical equipment manufacturing - Part 11: welding
YB/T 036.21-2026 — General technical requirement for metallurgical equipment manufacturing - Part 21: Packaging
YB/T 6399-2025
$315.00