YB/T 6398-2025Corrosion-resistant alloy small diameter welded coil tubes (English PDF)
耐蚀合金小口径焊接盘管
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YB/T 6398-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 17, 2025
Implementation date
July 1, 2026
Scope
YB/T 6398-2025 is the English-translated version of 耐蚀合金小口径焊接盘管.
YB/T 6398-2025 is the Chinese standard "Corrosion-resistant alloy small diameter welded coil tubes". This standard specifies the classification, ordering contents, manufacturing process, technical requirements, test methods, inspection rules, packaging, marking, and quality certificate of corrosion-resistant alloy small-diameter welded coils.
This standard is applicable to corrosion-resistant alloy small-diameter cold-drawn welded coils with a nominal outer diameter not exceeding 38 mm used in corrosive media in oil and gas wells.
It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-07-01.
Found what you need?
Document preview — YB/T 6398-2025
National Standard of the People's Republic of China
- ICS
- 77.140.75
- Classification
- H48
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 3 Terms and Definitions
- 4 Order information
- 5 Test method
- 6 Technical requirements
- 7 Test methods
- 8 Inspection rules
1 Foreword
YB/T 6398-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 July 2026.
The YB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the classification, ordering contents, manufacturing process, technical requirements, test methods, inspection rules, packaging, marking, and quality certificate of corrosion-resistant alloy small-diameter welded coils. This standard is applicable to corrosion-resistant alloy small-diameter cold-drawn welded coils with a nominal outer diameter not exceeding 38 mm used in corrosive media in oil and gas wells.
YB/T 6398-2025 falls under ICS 77.140.75, in the field of metallurgy.
This catalogue holds 971 other YB/T standards in that field.
In this catalogue, YB/T standards carry edition years from 1980 to 2026.
3 About this standard
Sector: Ferrous Metallurgy Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
GB/T 5312-2025 — Seamless steel tubes and pipes for ship
GB 6479-2013 — [GB/T 6479-2013] Seamless steel tubes for high-pressure chemical fertilizer equipment
YB/T 4164-2007 — Double wall copper-brazed steel tubing
YB/T 4223-2026 — Welded stainless steel tubes for feedwater heater
YB/T 4179-2026 — Metallic tube mould for centrifugal ductile iron pipe
YB/T 6400-2025 — Corrosion-resistant alloy tubes for solar tower molten salt receiver
5 Classification and status
International classification (ICS): 77.140.75
Chinese Standard Classification (CCS): H 48
Prefix YB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YB/T 6398-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YB/T 036.1-2026 — General technical requirement for metallurgical equipment manufacturing - Part 1: Inspection and trst
YB/T 036.11-2026 — General technical requirements for metallurgical equipment manufacturing - Part 11: welding
YB/T 036.21-2026 — General technical requirement for metallurgical equipment manufacturing - Part 21: Packaging
YB/T 6398-2025
$120.00