YB/T 4907-2021Ferromanganese, manganese-silicon alloy and manganese - Determination the content of manganese, silicon, iron and phosphorous - The X-ray fluorescence spectrometry method (English PDF)
锰铁、锰硅合金和金属锰 锰、硅、铁、磷含量的测定 波长色散X射线荧光光谱法
This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for YB/T 4907-2021 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
January 1, 2021
Implementation date
January 1, 2021
Scope
YB/T 4907-2021 is the English-translated version of 锰铁、锰硅合金和金属锰 锰、硅、铁、磷含量的测定 波长色散X射线荧光光谱法.
YB/T 4907-2021 is the Chinese standard "Ferromanganese, manganese-silicon alloy and manganese - Determination the content of manganese, silicon, iron and phosphorous - The X-ray fluorescence spectrometry method". It was issued by Ministry of Industry and Information Technology.
Found what you need?
Document preview — YB/T 4907-2021
National Standard of the People's Republic of China
- Classification
- H11
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 2.1 Terms
- 3 Principle
- 4 Reagents and materials
- 5 Instrument
- 6 Sampling and sample preparation
- 7 Preparation of casting glass sheet
- 8 Preparation of instruments
- 9 Analytical procedures
1 Foreword
YB/T 4907-2021 is issued by Ministry of Industry and Information Technology.
This standard was proposed by China Iron and Steel Industry Association.
This standard is under the jurisdiction of National Technical Committee on Pig Iron and Iron Alloy of Standardization Administration of China (SAC/TC 318).
Warning——Persons using this standard shall be familiar with normal laboratory practice. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions.
2 Scope Preview
This standard specifies the determination of the content of manganese, silicon, iron and phosphorous in ferromanganese, manganese-silicon alloy and manganese metal by the X-ray fluorescence spectrometry method (casting glass sheet method). This standard is applicable to the determination of the content of manganese, silicon, iron and phosphorous in ferromanganese, manganese-silicon alloy and manganese metal. See Table 1 for the determination range of each element. Table 1 Element and its determination range Analytical element Determination range (mass fraction)/% Mn Si Fe P 60.00–98.00 0.15–28.00 1.50–23.00 0.010–0.450
YB/T 4907-2021 is filed under Chinese Standard Classification H11, in the field of metallurgy.
This catalogue holds 1,116 other YB/T standards without an ICS number.
In this catalogue, YB/T standards carry edition years from 1980 to 2026.
3 Normative references
GB/T 4010 — Ferroallys sampling and preparation of samples for chemical analysis
GB/T 6379.1 — Accuracy (trueness and precision) of measurement methods and results—Part 1: General principles and definitions
GB/T 6379.2 — Accuracy (trueness and precision) of measurement methods and results—Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
GB/T 6682 — Water for analytical laboratory use—Specification and test methods
GB/T 8170 — Rules of rounding off for numerical values & expression and judgment of limiting values
GB/T 15000.3 — Directives for the work of reference materials (3)—Reference materials—General and statistical principles for certification
GB/T 16597 — Analytical methods of metallurgical products—General rule for X-ray fluorescence spectrometric methods
GB/T 28372 — Ferroalloys—Sampling and preparation of samples—General rules
YB/T 082 — Specification for certified reference materials for metallurgical products analysis
4 About this standard
Sector: Ferrous Metallurgy Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 8 pages (approximate)
Chinese original: about 11,149 characters
5 Related standards
Standards on related subjects:
GB/T 5686.2-2022 — Ferromanganese, ferromanganese-silicon, nitrogen-bearing ferromanganese and manganese metal—Determination of silicon content—Molybdenum blue spectrophotometric method, silicon potassium fluoride titrimetric method and perchloric acid dehydration gravimetric method
GB/T 4336-2016 — Carbon and low-alloy steel—Determination of multi-element contents—Spark discharge atomic emission spectrometric method (routine method)
GB/T 4701.1-2009 — Ferrotitanium - Determination of titanium content - The ammonium ferric sulfate titration method
YB/T 4908.3-2021 — Vanadium aluminum alloy Determination of aluminum content Barium salt strong alkali separation-EDTA titration method
YB/T 4908.2-2021 — Vanadium aluminum alloy-Determination of silicon, iron, phosphorus, boron, chromium, nickel, tungsten, copper, manganese, and molybdenum content-inductively coupled plasma atomic emission spectrometry
YB/T 4908.1-2021 — Vanadium aluminum alloy Determination of vanadium content Ammonium persulfate oxidation-ferrous ammonium sulfate titration method
6 Classification and status
Chinese Standard Classification (CCS): H 11
Prefix YB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
How to Download YB/T 4907-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YB/T 036.1-2026 — General technical requirement for metallurgical equipment manufacturing - Part 1: Inspection and trst
YB/T 036.11-2026 — General technical requirements for metallurgical equipment manufacturing - Part 11: welding
YB/T 036.21-2026 — General technical requirement for metallurgical equipment manufacturing - Part 21: Packaging
YB/T 4907-2021
$165.00