YB/T 4801-2020Ferromanganese, manganese-silicon alloy and metal manganese Determination of lead, arsenic, titanium, copper, nickel, calcium, magnesium, aluminum content by inductively coupled plasma atomic emission spectrometry (English PDF)
锰铁、锰硅合金和金属锰 铅、砷、钛、铜、镍、钙、镁、铝含量的测定 电感耦合等离子体原子发射光谱法
This is a limited preview
Buy now to download the full PDF (11 pages)
Need quotation for your management?
Get a formal quotation for YB/T 4801-2020 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
January 1, 2020
Implementation date
October 1, 2020
Scope
YB/T 4801-2020 is the English-translated version of 锰铁、锰硅合金和金属锰 铅、砷、钛、铜、镍、钙、镁、铝含量的测定 电感耦合等离子体原子发射光谱法.
YB/T 4801-2020 is the Chinese standard "Ferromanganese, manganese-silicon alloy and metal manganese Determination of lead, arsenic, titanium, copper, nickel, calcium, magnesium, aluminum content by inductively coupled plasma atomic emission spectrometry".
This standard specifies the determination of lead, arsenic, titanium, copper, nickel, calcium, magnesium and aluminum content by inductively coupled plasma atomic emission spectrometry.
This standard is applicable to the determination of lead, arsenic, titanium, copper, nickel, calcium, magnesium and aluminum content in ferromanganese, manganese-silicon alloy, and metal manganese. It was issued by Ministry of Industry and Information Technology.
Found what you need?
Document preview — YB/T 4801-2020
National Standard of the People's Republic of China
- ICS
- 77.100
- Classification
- H11
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 2.1 Terms
- 3 Principle
- 4 Reagents
- 5 Apparatus
- 6 Sampling and sample preparation
- 7 Analytical procedures
- 8 Calculation of analysis results
- 9 Precision
1 Foreword
YB/T 4801-2020 was issued by Ministry of Industry and Information Technology on 16 April 2020 and has been in force since 1 October 2020.
Warning: Users of this standard shall have practical work experience in standardized laboratories. This part does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health measures and to ensure compliance with any national regulatory conditions.
The YB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard specifies the determination of lead, arsenic, titanium, copper, nickel, calcium, magnesium and aluminum content by inductively coupled plasma atomic emission spectrometric method. This standard is applicable to the determination of lead, arsenic, titanium, copper, nickel, calcium, magnesium and aluminum content in ferromanganese, ferromanganese-silicon and manganese metal. See Table 1 for the determination range. Table 1 Determination range and recommended analytical lines of each element Type Content/% Recommended analytical line/nm Type Content/% Recommended analytical line/nm Lead 0.0080~0.1200 220.353 Nickel 0.0030~0.2500 231.604 Arsenic 0.0040~0.1200 197.262 Calcium 0.0080~0.2000 393.366 or 317.933 Titanium 0.0010~0.3500 336.121 Magnesium 0.0080~0.5000 279.553 Copper 0.0080~0.2500 324.754 Aluminum 0.0080~0.3500 396.152
YB/T 4801-2020 falls under ICS 77.100, in the field of metallurgy.
This catalogue holds 971 other YB/T standards in that field.
In this catalogue, YB/T standards carry edition years from 1980 to 2026.
3 Normative references
GB/T 4010 — Ferroallys sampling and preparation of samples for chemical analysis
GB/T 6379.1 — Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions
GB/T 6379.2 — Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
GB/T 6682 — Water for analytical laboratory use - Specification and test methods
GB/T 8170 — Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 28372 — Ferroalloys - Sampling and preparation of samples - General rules
GB/T 36244 — Inductively coupled plasma optical emission spectrometer
JJG 768 — Verification regulation of emission spectrometer
4 About this standard
Sector: Ferrous Metallurgy Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 11 pages (approximate)
Chinese original: about 17,166 characters
5 Related standards
Standards on related subjects:
GB/T 5686.2-2022 — Ferromanganese, ferromanganese-silicon, nitrogen-bearing ferromanganese and manganese metal—Determination of silicon content—Molybdenum blue spectrophotometric method, silicon potassium fluoride titrimetric method and perchloric acid dehydration gravimetric method
GB/T 4336-2016 — Carbon and low-alloy steel—Determination of multi-element contents—Spark discharge atomic emission spectrometric method (routine method)
GB/T 4701.1-2009 — Ferrotitanium - Determination of titanium content - The ammonium ferric sulfate titration method
YB/T 4582.11-2026 — Ferrosilicon nitride - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas
YB/T 4220-2026 — Vanadium pentoxide - Determination of sodium oxide and potaiumss oxide content - The inductively coupled plasmaatomic emission spectrometry
YB/T 4799-2018 — Iron and steel. Determination of aluminium nitride precipitated phase content. Inductively coupled plasma atomic emission spectrometic method after electrolytic separation
6 Classification and status
International classification (ICS): 77.100
Chinese Standard Classification (CCS): H 11
Prefix YB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 11 pages — is available in the English PDF.
How to Download YB/T 4801-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YB/T 036.1-2026 — General technical requirement for metallurgical equipment manufacturing - Part 1: Inspection and trst
YB/T 036.11-2026 — General technical requirements for metallurgical equipment manufacturing - Part 11: welding
YB/T 036.21-2026 — General technical requirement for metallurgical equipment manufacturing - Part 21: Packaging
YB/T 4801-2020
$240.00