YB/T 4730-2019Technical requirement for the pretreatment of steel wire without acid washing (English PDF)
钢丝无酸洗拉拔预处理技术要求
This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for YB/T 4730-2019 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
January 1, 2019
Implementation date
November 1, 2019
Scope
YB/T 4730-2019 is the English-translated version of 钢丝无酸洗拉拔预处理技术要求.
YB/T 4730-2019 is the Chinese standard "Technical requirement for the pretreatment of steel wire without acid washing".
This standard specifies the marking, order content, complete equipment composition, technical requirements, basic process requirements, inspection methods, inspection rules, marking, packaging, transportation and storage of special equipment and processes for wire-free pickling drawing.
This standard is applicable to the drawing process and special equipment for wire rod without pickling on-line peeling and on-line surface treatment. The production process adopted in this standard is a clean production process that can replace the pickling process for some steel wires. It was issued by Ministry of Industry and Information Technology.
Found what you need?
Document preview — YB/T 4730-2019
National Standard of the People's Republic of China
- ICS
- 77.140.65
- Classification
- H49
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 3 Terms and Definitions
- 4 Order information
- 5 Test method
- 6 Technical requirements
- 7 Test methods
- 8 Inspection rules
1 Foreword
YB/T 4730-2019 was issued by Ministry of Industry and Information Technology on 2 May 2019 and has been in force since 1 November 2019.
The YB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 8 pages in English translation.
2 Scope Preview
This standard specifies the marking, order content, complete equipment composition, technical requirements, basic process requirements, inspection methods, inspection rules, marking, packaging, transportation and storage of special equipment and processes for wire-free pickling drawing. This standard is applicable to the drawing process and special equipment for wire rod without pickling on-line peeling and on-line surface treatment. The production process adopted in this standard is a clean production process that can replace the pickling process for some steel wires.
YB/T 4730-2019 falls under ICS 77.140.65, in the field of metallurgy.
This catalogue holds 971 other YB/T standards in that field.
In this catalogue, YB/T standards carry edition years from 1980 to 2026.
3 About this standard
Sector: Ferrous Metallurgy Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 8 pages (approximate)
Chinese original: about 10,124 characters
4 Related standards
Standards on related subjects:
GB/T 4357-2022 — Cold-drawn unalloyed steel wire for springs
GB/T 4240-2019 — Stainless steel wires
YB/T 4575-2016 — Steel wire ropes for temporarily installed suspended access equipment
YB/T 5318-2025 — Alloy spring steel wires
YB/T 5219-2025 — Medical Suture Needle Wire
YB/T 4729-2019 — Zinc-10% aluminum mischmetal alloy-coated cable for building engineering
5 Classification and status
International classification (ICS): 77.140.65
Chinese Standard Classification (CCS): H 49
Prefix YB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
How to Download YB/T 4730-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YB/T 036.1-2026 — General technical requirement for metallurgical equipment manufacturing - Part 1: Inspection and trst
YB/T 036.11-2026 — General technical requirements for metallurgical equipment manufacturing - Part 11: welding
YB/T 036.21-2026 — General technical requirement for metallurgical equipment manufacturing - Part 21: Packaging
YB/T 4730-2019
$164.00